You are here:
€90.73
Regular price:
€98.62
€90.73
Regular price:
€98.62
€740.02
Regular price:
€804.37
€99.19
Regular price:
€107.82
€62.07
Regular price:
€91.72
€63.24
Regular price:
€68.74
€65.35
Regular price:
€71.03
€634.27
Regular price:
€689.43
Easter Gift Ideas That Actually Get Used
Advanced Search Options
Scooter headsets are an essential part of every bike or scooter. To keep your setup performing at its best, check their condition regularly.
Take care of your scooter and your safety, choose quality parts from trusted manufacturers!
Blunt Envy integrated headsets | Black (1)
€25.06
Blunt Envy integrated headsets | Black (1) (1)
€25.06
Blunt Envy integrated headsets | Black (1) (1)
€25.06
Blunt Envy integrated headsets | Black (1) (1) (1) (1)
€27.36
Chubby Burger integrated rudders | Brown
€27.36
Chubby Donut integrated headsets | Black
€27.36
CORE Dash integrated headsets | Black (1)
€25.06
CORE Dash integrated headsets | Black (1) (1) (1)
€25.06
CORE Dash integrated headsets | Black (1) (1) (1)
€25.06
Dial 911 C-Ring for integrated headsets
€3.22
Dial 911 O-Ring for integrated headsets
€2.07
Integrated headsets fit decks with built-in bearing cups, just drop the bearings in. Non-integrated headsets require separate cups to be pressed into the deck. Check your deck before ordering to match the right type.
Most modern headsets work with SCS, HIC, IHC and ICS as long as you use a threadless fork and the correct crown race. Always check the fork’s steerer length and diameter for compatibility.
For daily riders, inspect bearings every few months. Replace them when you feel roughness, hear grinding, or notice play that tightening can’t fix. Sealed bearings usually last longer than loose-ball styles.
Most rattles come from bearings that need cleaning or a headset that isn’t pre-loaded enough. Re-grease the bearings and tighten the compression bolt until the play disappears but the bar spins freely.
Integrated headsets drop in by hand. Non-integrated cups need to be pressed in squarely, ideally with a headset press. A DIY method is possible but be careful not to damage the deck.
Yes. The crown race lets the bearing sit correctly on the fork and the dust cap keeps dirt and moisture out, extending bearing life and keeping your headset smooth.
Log in
Language
Currency
Newsletter
