WeThePeople Thrillseeker XL 20-inch BMX bike, 21-inch TT — a complete setup for learning freestyle:

Key features

• Suggested rider height: Approx. 180 cm and taller
• Size: XL
• Top tube length (TT / A): 21 in
• Wheel size: 20 x 2.25 in
• Cranks: Salt Rookie, three-piece 4130 chromoly, 165 mm
• Weight: 11.60 kg

The WeThePeople Thrillseeker XL gives a beginner rider a 21-inch top tube with 20-inch wheels. It comes with three-piece chromoly cranks, a rear U-brake and a complete set of contact points, so you can prepare one bike for practising the basics.

Check the size against your position

The suggested rider height is approximately 180 cm and taller. Use it as a guide, then compare the 21-inch TT, 8.25-inch standover and 9-inch bar rise with your proportions and a bike you know. TT means the frame’s top tube length; the wheel diameter is 20 inches in this version.

Equipment for the first sessions

Salt EX grips and Éclat Surge pedals provide the contact points. A Salt Rookie lever operates the rear U-brake, giving you a way to manage speed while practising. The 165 mm cranks work with a 25T sprocket and 9T cassette driver.

The Salt AM fork has a chromoly steerer and tapered Hi-Ten legs. Salt Strike 20 x 2.25-inch tyres sit on Salt Rookie rims. The front hub uses loose ball bearings, and the rear cassette hub is semi-sealed. Keep the wheels, bearings, drivetrain and brake adjusted as you ride.

The frame is prepared for gyro fitting, but a gyro is not listed as included. Check component fit before choosing any future upgrades.

WeThePeople Thrillseeker XL 20-inch BMX bike, 21-inch TT — specifications:

Sizing, weight and other details:

• Suggested rider height: Approx. 180 cm and taller
• Size: XL
• Wheel size: 20 x 2.25 in
• Weight: 11.60 kg
• Rider level: Beginner

Frame geometry:

• Top tube length (TT / A): 21 in
• Chainstay length (CS / B): 12.75 in
• Head tube angle (HA / C): 74.5°
• Seat tube angle (SA / D): 71.5°
• Bottom bracket height (BB / E): 11.7 in
• Standover height (SO / F): 8.25 in

Cranks:

• Cranks: Salt Rookie, three-piece 4130 chromoly, 165 mm

Frame:

• Frame: WeThePeople Thrillseeker XL, Hi-Ten 1020, prepared for gyro fitting

Fork:

• Fork: Salt AM, 4130 chromoly steerer, tapered Hi-Ten 1020 legs, 26 mm offset

Handlebars:

• Handlebar: Salt Thrillseeker, Hi-Ten 1020; height (G): 9 in; width (H): 28.85 in

Stem:

• Stem: Salt AM, aluminium, top load

Headset:

• Headset: Salt Pro, integrated

Wheels and rims:

• Rims: Salt Rookie, 20 in, 36H

Tyres:

• Tyres: Salt Strike, 20 x 2.25 in

Bottom bracket:

• Bottom bracket: Mid BB, 19 mm, cartridge bearings

Chainring or sprocket:

• Sprocket: Salt Gateway, 25T

Front hub:

• Front hub: Salt Thrillseeker, 10 mm chromoly axle, loose ball bearings, 36H

Rear hub and driver:

• Rear hub: Salt Thrillseeker cassette, 14 mm chromoly axle, semi-sealed, 36H, 9T driver

Chain:

• Chain: Salt AM Z1

Brake levers:

• Brake lever: Salt Rookie

Brakes and controls:

• Rear brake: Salt Rookie U-brake

Saddle and seatpost:

• Saddle: WeThePeople Thrillseeker, one-piece combo
• Seat clamp: Salt Rookie

Pedals:

• Pedals: Éclat Surge, nylon / fibreglass, 9/16 in

Grips and bar ends:

• Grips: Salt EX, 154 mm

Safety while riding

Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.

Frame geometry diagram

Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.