
WeThePeople Justice 20-inch BMX bike, 20.75-inch TT | Ghost Grey
Last item (ready for dispatch)
Description
WeThePeople Justice 20-inch BMX bike, 20.75-inch TT — a complete setup for freestyle riding:
Key features
- Suggested rider height: Approx. 160–180 cm
- Top tube length (TT / A): 20.75 in
- Wheel size: 20 x 2.35 in
- Bar: 9 in rise (G), 29.25 in width (H)
- Drivetrain: Salt Pro cassette
- Weight: 11.79 kg
The WeThePeople Justice combines a 4130 Trimoly frame with a full chromoly fork and bars. A Paragon sprocket guard and four hub guards protect the covered areas of the drivetrain and hubs during contact with obstacles.
Compare the geometry with your stance
The suggested rider height is approximately 160–180 cm. This version has a 20.75-inch top tube and 20-inch wheels. Compare the 12.75-inch chainstays, 9-inch bar rise and 29.25-inch bar width with your proportions and a bike you know.
Useful equipment for practice
The 165 mm three-piece chromoly cranks work with a 25T sprocket and 9T cassette driver. WeThePeople Activate tyres measure 20 x 2.35 inches. A Salt AM lever operates the Éclat Talon rear U-brake, giving you a way to manage speed.
The Éclat Bios Fat Pivotal saddle and separate aluminium seatpost let you adjust saddle angle and height. The frame is prepared for gyro fitting, but a gyro is not listed as included. Keep the wheels, bearings, drivetrain and brake checked and serviced as you ride.
WeThePeople Justice 20-inch BMX bike, 20.75-inch TT — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 160–180 cm
- Wheel size: 20 x 2.35 in
- Weight: 11.79 kg
Frame geometry:
- Top tube length (TT / A): 20.75 in
- Chainstay length (CS / B): 12.75 in
- Head tube angle (HA / C): 76°
- Seat tube angle (SA / D): 71°
- Bottom bracket height (BB / E): 11.75 in
- Standover height (SO / F): 9 in
Handlebars:
- Bar: 9 in rise (G), 29.25 in width (H)
- Handlebar: SaltPlus HQ, full 4130 chromoly; backsweep: 11°; upsweep: 2.5°
Drivetrain:
- Drivetrain: Salt Pro cassette
Frame:
- Frame: WeThePeople Justice, 4130 Trimoly, tapered seatstays and chainstays, removable brake mounts
Fork:
- Fork: SaltPlus Justice, full 4130 chromoly, 22 mm offset
Stem:
- Stem: Salt Zion, aluminium, top load, 50 mm reach
Headset:
- Headset: Salt Pro, integrated, cartridge bearings
Wheels and rims:
- Rims: Front: Salt Valon; rear: SaltPlus Summit; 20 in, 36H
Tyres:
- Tyres: WeThePeople Activate, 20 x 2.35 in
Cranks:
- Cranks: Salt Revo, three-piece 4130 chromoly, 165 mm
Bottom bracket:
- Bottom bracket: Mid BB, 19 mm, cartridge bearings
Chainring or sprocket:
- Sprocket: WeThePeople Paragon, aluminium, 25T, nylon guard
Front hub:
- Front hub: Salt Pro, 10 mm chromoly axle, cartridge bearings, 36H
Rear hub and driver:
- Rear hub: Salt Pro cassette, 14 mm chromoly axle, cartridge bearings, 36H, 9T driver
Hubs and guards:
- Hub guards: Salt Pro, nylon / fibreglass, two front and two rear
Chain:
- Chain: Salt AM Z1
Brake levers:
- Brake lever: Salt AM
Brakes and controls:
- Rear brake: Éclat Talon U-brake
- Gyro fitting: Prepared for gyro fitting; gyro not listed as included
Saddle and seatpost:
- Saddle: Éclat Bios Fat, Pivotal
- Seatpost: Salt AM, Pivotal, aluminium
- Seat clamp: Integrated
Pedals:
- Pedals: WeThePeople Logic, nylon / fibreglass, 9/16 in
Grips and bar ends:
- Grips: WeThePeople Perfect, 165 mm
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency