
WTP WeThePeople Seed 16-inch children’s BMX bike | Black
Last item (ready for dispatch)
Description
WTP WeThePeople Seed 16-inch children’s BMX bike — shorter cranks and a compact frame for younger riders:
Key features
- Suggested rider height: Approx. 120–135 cm
- Wheel size: 16 in
- Top tube length (TT): 16 in
- Chainstay length (CS): 11 in
- Cranks: Salt Rookie, three-piece 4130 chromoly, 127 mm
- Tyres: Salt Tracer, 16 x 2.2 in
- Drivetrain: 25T / 10T cassette
- Bar: 6.77 in rise, 23.6 in width
- Weight: Approx. 9.46 kg
A BMX sized for a smaller rider
The Seed has 16-inch wheels and a 16-inch top tube, with 127 mm cranks that keep the pedalling circle smaller than adult-length cranks would. Compare the frame and contact points with your child’s current bike before moving to a larger size.
The suggested rider height is around 120–135 cm. Treat that as a guide and check reach, frame clearance and brake lever reach. The bar measures 23.6 inches wide with a 6.77-inch rise. The 6.67-inch seat tube measurement runs from the bottom bracket to the top of the seat tube, not from the ground.
A simple single-speed drivetrain
A 25T Salt Gateway sprocket drives the 10T Salt Seed cassette hub. There are no gear changes to operate. When rolling backwards, a cassette requires back-pedalling. The rear hub is semi-sealed, and the three-piece Salt Rookie cranks are made from 4130 chromoly.
Room to change the brake cable setup
The frame is prepared for a gyro. That gives you an option to consider for a future brake cable change, but it does not mean a gyro is included. Have the correct parts and installation checked before making changes.
The listed brake setup uses a Salt AM lever and Salt AM rear brake. Have the brakes adjusted and check their operation before riding.
Check the bike before every session
The frame is 1020 hi-ten steel; the fork combines a chromoly steerer with hi-ten legs. Salt Tracer 16 x 2.2-inch tyres, Salt Junior Pro nylon/fibreglass pedals and a Pivotal saddle complete the build.
Inspect the frame, fork, bars, wheels, cranks, pedals, brakes and fixings before riding. Choose features suited to the rider’s ability and stop if you find play or damage.
WTP WeThePeople Seed 16-inch children’s BMX bike — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 120–135 cm
- Wheel size: 16 in
- Weight: Approx. 9.46 kg
Frame geometry:
- Top tube length (TT): 16 in
- Chainstay length (CS): 11 in
- Head tube angle (HA): 75°
- Seat tube angle (SA): 71.5°
- Bottom bracket height (BB): 9.75 in
- Seat tube height (SO, bottom bracket to top of seat tube): 6.67 in
Cranks:
- Cranks: Salt Rookie, three-piece 4130 chromoly, 127 mm
Tyres:
- Tyres: Salt Tracer, 16 x 2.2 in
Drivetrain:
- Drivetrain: 25T / 10T cassette
Handlebars:
- Bar: 6.77 in rise, 23.6 in width
- Bar construction: Salt Seed, 1020 hi-ten
Frame:
- Frame: WTP Seed, 1020 hi-ten steel; prepared for a gyro
Fork:
- Fork: Salt AM 16, 4130 chromoly steerer, 1020 hi-ten legs; 28 mm offset
Stem:
- Stem: Salt Junior, top load, aluminium
Headset:
- Headset: Salt Pro, integrated, cartridge bearings
Wheels and rims:
- Rims: Salt Fraction, 16 in, 28H
Bottom bracket:
- Bottom bracket: Spanish, 19 mm, cartridge bearings
Chainring or sprocket:
- Sprocket: Salt Gateway, 25T
Front hub:
- Front hub: Salt Seed, ball bearings, 28H; 10 mm (3/8 in) chromoly axle
Rear hub and driver:
- Rear hub: Salt Seed cassette, semi-sealed, 14 mm hollow chromoly axle, 28H; 10T driver
Chain:
- Chain: Salt AM, Z1 type
Saddle and seatpost:
- Saddle: WTP Seed, Pivotal
- Seatpost: Salt AM, Pivotal, aluminium
- Seat clamp: Éclat Pure, forged aluminium
Pedals:
- Pedals: Salt Junior Pro, nylon/fibreglass, 9/16 in
Grips and bar ends:
- Grips: WTP Arrow, 130 mm
Brake levers:
- Brake lever: Salt AM
Brakes and controls:
- Rear brake: Salt AM
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency