WTP WeThePeople Revolver 20-inch BMX bike — an all-round build with pegs and hub guards included:

Key features

• Wheel size: 20 in
• Top tube length (A, TT): 21 in
• Suggested rider height: Approx. 175 cm and above
• Frame and fork: Full 4130 Sanko chromoly
• Drivetrain: 28T / 9T cassette
• Pegs and hub guards: Two Éclat Dura pegs and two Éclat Pulse guards
• Weight: Approx. 11.52 kg

A complete build for varied BMX sessions

The Revolver combines a 21-inch top tube, 13.4-inch chainstay and 30 mm fork offset in an all-round BMX setup. Compare those measurements with your preferred bike if your sessions take you from bowls and trails to street spots. The suggested rider height starts at around 175 cm; check reach and frame clearance as well.

A 28T sprocket and 9T cassette driver give a higher gear ratio than a 25/9 setup with the same wheel size. That means more distance for each full pedal turn, with more effort needed to push the gear. A cassette also requires back-pedalling when you roll backwards.

Pegs and hub protection included

You get two 4140 chromoly Éclat Dura pegs and two Éclat Pulse hub guards, one front and one rear. The guards help shield the hubs from contact during grinds. The Éclat Pulse cassette hub uses an SDS driver that supports left- or right-hand drive; have any conversion checked and set up correctly.

Full-chromoly construction and adjustable contact points

The frame and Éclat Storm fork use Sanko Japan 4130 chromoly, with butted tubing. WTP Logic double-wall welded rims, 175 mm Logic cranks and Overbite 2.35-inch tyres complete the build. The Pivotal saddle and post allow saddle-angle adjustment within their limits.

A Salt Moto lever operates the rear Éclat Talon U-brake. The frame has removable brake pivots and is prepared for a gyro; preparation does not mean a gyro is included. The frame and fork carry a manufacturer’s lifetime guarantee, subject to its terms and conditions. Read the supplied warranty and assembly instructions before riding.

WTP WeThePeople Revolver 20-inch BMX bike — specifications:

Sizing, weight and other details:

• Wheel size: 20 in
• Suggested rider height: Approx. 175 cm and above
• Weight: Approx. 11.52 kg
• Pegs: Éclat Dura, 4140 chromoly; one front and one rear

Frame geometry:

• Top tube length (A, TT): 21 in
• Top tube length (A, TT): 21 in
• Chainstay length (B, CS): 13.4 in
• Head tube angle (C, HA): 74.85°
• Seat tube angle (D, SA): 71°
• Bottom bracket height (E, from the ground): 11.47 in
• Seat tube height (F, SO, bottom bracket to top of seat tube): 9.1 in

Frame, fork and handlebars:

• Frame and fork: Full 4130 Sanko chromoly

Drivetrain:

• Drivetrain: 28T / 9T cassette

Hubs and guards:

• Pegs and hub guards: Two Éclat Dura pegs and two Éclat Pulse guards
• Hub guards: Éclat Pulse, 4140 chromoly; one front and one rear

Frame:

• Frame: WTP Revolver, Sanko Japan 4130 chromoly, butted tubes, chain tensioners, 127 mm head tube, removable brake pivots, prepared for a gyro
• Frame and fork warranty: Manufacturer’s lifetime guarantee, subject to its terms and conditions

Fork:

• Fork: Éclat Storm, Sanko Japan 4130 chromoly, butted legs, 30 mm offset

Handlebars:

• Bar: WTP Revolver, full 4130 chromoly; 29.7 in width (H), 9.25 in rise (G), 11° backsweep, 2.5° upsweep

Stem:

• Stem: Éclat Metra, CNC-machined aluminium, top load, 51 mm reach, 30 mm rise

Headset:

• Headset: Éclat Wave 6, integrated, cartridge bearings

Cranks:

• Cranks: WTP Logic, three-piece 4130 chromoly, 22 mm spindle, 175 mm arms, 48-spline

Bottom bracket:

• Bottom bracket: WTP Compact, Mid BB, 22 mm, press fit, cartridge bearings

Chainring or sprocket:

• Sprocket: Éclat Abyss, aluminium, 28T

Chain:

• Chain: Éclat Diesel

Front hub:

• Front hub: Éclat Pulse, fully sealed cartridge bearings, 10 mm / 3/8 in female axle, 36H

Rear hub and driver:

• Rear hub: Éclat Pulse cassette, fully sealed cartridge bearings, 14 mm chromoly axle, 36H, 9T SDS driver; left/right-hand drive compatible

Wheels and rims:

• Rims: WTP Logic, 20 in, 36H, double wall, welded

Tyres:

• Tyres: WTP Overbite, 20 x 2.35 in

Brake levers:

• Brake lever: Salt Moto

Brakes and controls:

• Rear brake: Éclat Talon U-brake

Saddle and seatpost:

• Saddle: WTP Team Slim, Pivotal
• Seatpost: WTP Team, Pivotal, aluminium, 200 mm
• Seat clamp: WTP Supreme, CNC-machined aluminium

Pedals:

• Pedals: Éclat Contra

Grips and bar ends:

• Grips: Éclat Filter with Tech-Bolt bar ends

Safety while riding

Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.

Frame geometry diagram