WTP WeThePeople Havoc 22-inch dirt and trail BMX bike — more room for your trail riding:

Key features

• Riding style: Dirt and trails
• Wheel size: 22 in
• Top tube length (A, TT): 22.25 in
• Suggested rider height: Approx. 165 cm and above
• Frame and fork: 4130 chromoly
• Brake: Magura MT4 hydraulic disc, 140 mm rotor
• Bar: 9 in rise, 29.25 in width
• Weight: Approx. 12.27 kg

More room than a conventional 20-inch BMX

If a 20-inch BMX feels cramped on the trails, compare the Havoc’s 22-inch wheels and 22.25-inch top tube with your current bike. Based on WTP Chaos Machine geometry, this is a dirt-and-trail build with a 14.35-inch chainstay. Its longer layout is an option if you prefer more room and a steadier feel when carrying speed.

The larger wheels roll over uneven ground more readily than smaller wheels on a comparable setup. They are paired with WTP Overbite tyres, while a Magura MT4 hydraulic disc brake and 140 mm rotor let you control your speed between sections. Check brake operation before every ride.

Compare the fit before moving up a wheel size

The suggested rider height starts at around 165 cm, but height alone does not decide fit. Compare reach, frame clearance and your preferred position, especially if you are used to a shorter bike. The bar has a 9-inch rise and 29.25-inch width, and the cranks have 170 mm arms.

A full-chromoly frame and fork

The 4130 chromoly Havoc frame has butted tubing and a disc brake mount, paired with a 4130 chromoly fork with 32 mm offset. Double-wall WTP Logic rims and sealed-bearing Éclat Exile hubs complete the wheels.

The drivetrain uses a 28T Exile sprocket and 9T cassette driver. You can coast forwards; rolling backwards requires back-pedalling. The Pivotal saddle and post let you adjust the saddle angle within their limits. Choose trail features that suit your ability, wear suitable protection and inspect the bike after hard impacts.

WTP WeThePeople Havoc 22-inch dirt and trail BMX bike — specifications:

Sizing, weight and other details:

• Riding style: Dirt and trails
• Wheel size: 22 in
• Suggested rider height: Approx. 165 cm and above
• Weight: Approx. 12.27 kg

Frame geometry:

• Top tube length (A, TT): 22.25 in
• Top tube length (A, TT): 22.25 in
• Chainstay length (B, CS): 14.35 in
• Head tube angle (C, HA): 74.25°
• Seat tube angle (D, SA): 71°
• Bottom bracket height (E, from the ground): 12.25 in
• Seat tube height (F, SO, bottom bracket to top of seat tube): 9.75 in

Frame, fork and handlebars:

• Frame and fork: 4130 chromoly

Brakes and controls:

• Brake: Magura MT4 hydraulic disc, 140 mm rotor

Handlebars:

• Bar: 9 in rise, 29.25 in width
• Bar construction: WTP Havoc 20, 4130 chromoly; 11° backsweep, 2.5° upsweep

Frame:

• Frame details: WTP Havoc 22, butted tubing, disc brake mount, 127 mm head tube

Fork:

• Fork: WTP Havoc 22, 4130 chromoly, 32 mm offset

Stem:

• Stem: Éclat Metra, CNC-machined aluminium, top load, 51 mm reach

Headset:

• Headset: Éclat Wave 6, integrated, cartridge bearings

Wheels and rims:

• Rims: WTP Logic, 22 in, 36H, double wall

Tyres:

• Tyres: WTP Overbite, 22 x 2.35 in

Cranks:

• Cranks: SaltPlus Ultra, three-piece 4130 chromoly, 170 mm

Bottom bracket:

• Bottom bracket: Salt Mid BB, 19 mm, cartridge bearings

Chainring or sprocket:

• Sprocket: Éclat Exile, 7075 aluminium, 28T

Front hub:

• Front hub: Éclat Exile, sealed cartridge bearings, 3/8 in chromoly female axle, 36H

Rear hub and driver:

• Rear hub: Éclat Exile Disc cassette, sealed cartridge bearings, 14 mm chromoly female axle, 36H, 9T driver, disc brake mount

Chain:

• Chain: WTP Supply

Saddle and seatpost:

• Saddle: Éclat Exile Slim, Pivotal
• Seatpost: Salt AM, aluminium, Pivotal, 200 mm
• Seat clamp: Éclat Pure, aluminium

Pedals:

• Pedals: Éclat Contra

Grips and bar ends:

• Grips: Salt EX, 155 mm

Safety while riding

Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.

Frame geometry diagram