
WTP WeThePeople CRS FC 20-inch BMX bike, 20.25-inch TT | Black
Last item (ready for dispatch)
Description
WTP WeThePeople CRS FC 20-inch BMX bike, 20.25-inch TT — a compact freecoaster setup for fakie practice:
Key features
- Suggested rider height: Approx. 150–165 cm
- Top tube length (TT / A): 20.25 in
- Wheel size: 20 x 2.35 in
- Cranks: Three-piece 4130 chromoly, 165 mm, Salt Rookie
- Weight: 12 kg
- Rider level: Beginner
- Rear hub type: Freecoaster
The WeThePeople CRS FC pairs the compact CRS frame with a Salt Pro freecoaster rear hub, giving you a setup for practising fakie lines. A freecoaster lets the rear wheel roll backwards without forcing the cranks to turn backwards when the mechanism is disengaged.
Compact geometry for a smaller rider
The 20-inch wheels sit in a frame with a 20.25-inch top tube, marked TT in the specification. The suggested height is approximately 150–165 cm; use that as a guide and compare the geometry with your proportions and riding preference. A 12.75-inch rear end, 26 mm fork offset and 165 mm cranks make up the compact setup.
Useful adjustments as you learn
The Éclat Bios Pivotal seat and Salt AM Pivotal post let you adjust the saddle angle. An Éclat Pure forged aluminium clamp secures the post. Salt Tracer 20 x 2.35-inch tyres and Salt Fraction rims complete the wheels, with a Saltplus Geo XL rear brake and Salt AM lever for controlling speed.
The frame combines a 4130 chromoly down tube with 1020 Hi-Ten steel. The Salt AM fork has a chromoly steerer and Hi-Ten legs. The frame is prepared for a gyro; check the parts needed for a compatible installation before adding one.
WTP WeThePeople CRS FC 20-inch BMX bike, 20.25-inch TT — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 150–165 cm
- Wheel size: 20 x 2.35 in
- Weight: 12 kg
- Rider level: Beginner
Frame geometry:
- Top tube length (TT / A): 20.25 in
- Chainstay length (CS / B): 12.75 in
- Head tube angle (HA / C): 75°
- Seat tube angle (SA / D): 71.5°
- Bottom bracket height (BB / E): 11.75 in
- Standover height (SO / F): 8.4 in
Cranks:
- Cranks: Three-piece 4130 chromoly, 165 mm, Salt Rookie
Rear hub and driver:
- Rear hub type: Freecoaster
- Driver: 9T
- Rear hub: Salt Pro freecoaster; hollow 14 mm chromoly axle; 36H; sealed cartridge bearings
Frame:
- Frame: 4130 chromoly down tube / 1020 Hi-Ten steel
Brakes and controls:
- Gyro compatibility: Frame prepared for a gyro
- Rear brake: Saltplus Geo XL
Fork:
- Fork: Salt AM; 4130 chromoly steerer, 1020 Hi-Ten legs; tapered legs; 26 mm offset
Handlebars:
- Handlebar: Height (G): 8.85 in; width (H): 29 in; Salt CRS 20, 1020 Hi-Ten
Stem:
- Stem: Aluminium, top load, Salt Pro
Wheels and rims:
- Rims: Salt Fraction, 20 in, 36H
Tyres:
- Tyres: Salt Tracer, 20 x 2.35 in
Bottom bracket:
- Bottom bracket: Mid BB, cartridge bearings, 19 mm
Chainring or sprocket:
- Sprocket: Salt Gateway, 25T
Chain:
- Chain: Salt AM Z1
Front hub:
- Front hub: Salt AM; 10 mm chromoly axle; 36H; loose ball bearings
Headset:
- Headset: Salt Pro, integrated
Brake levers:
- Brake lever: Salt AM
Saddle and seatpost:
- Saddle: Éclat Bios, Pivotal
- Seatpost: Salt AM, aluminium, Pivotal
- Seat clamp: Éclat Pure, forged aluminium
Pedals:
- Pedals: Éclat Surge, nylon / fibreglass, 9/16 in
Grips and bar ends:
- Grips: Salt EX, 154 mm
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency