
WTP WeThePeople Arcade 20-inch BMX bike, 20.5-inch TT | Translucent Teal
Last item (ready for dispatch)
Description
WTP WeThePeople Arcade 20-inch BMX bike, 20.5-inch TT — a complete setup for street practice:
Key features
- Suggested rider height: Approx. 155–175 cm
- Top tube length (TT / A): 20.5 in
- Wheel size: 20 x 2.35 in
- Cranks: Three-piece chromoly, 165 mm
- Weight: 12.39 kg
- Rider level: Intermediate
- Rear hub type: Cassette
The WeThePeople Arcade brings a 20.5-inch top tube, 165 mm three-piece chromoly cranks and a cassette hub together in a street-focused complete. Four Salt Pro hub guards help protect the hubs during grinds, giving you a useful part of a street setup without selecting the guards separately.
Compare the fit before choosing
The wheels are 20 inches; 20.5 inches TT is the frame’s top tube length. The suggested rider height is approximately 155–175 cm, with body proportions and preference also affecting the fit. Compare the top tube and 12.75-inch chainstays with a bike you know. The bars measure 9 inches high and 29.5 inches wide.
Street equipment with room to adjust
The frame uses chromoly in the top tube and down tube, combined with Hi-Ten steel. The Salt AM fork has a chromoly steerer and 26 mm offset. The 36 mm-wide rims carry 2.35-inch tyres, with a 25T sprocket and 9T cassette driver in the drivetrain.
The Pivotal saddle and seatpost let you adjust the saddle angle, while the U-brake gives you control over your speed. Check the brake adjustment, wheel clearance and every bolted connection before riding.
WTP WeThePeople Arcade 20-inch BMX bike, 20.5-inch TT — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 155–175 cm
- Wheel size: 20 x 2.35 in
- Weight: 12.39 kg
- Rider level: Intermediate
Frame geometry:
- Top tube length (TT / A): 20.5 in
- Chainstay length (CS / B): 12.75 in
- Head tube angle (HA / C): 75°
Cranks:
- Cranks: Three-piece chromoly, 165 mm
Rear hub and driver:
- Rear hub type: Cassette
- Driver: 9T
- Rear hub: Cassette; 14 mm axle
Frame:
- Frame: 4130 chromoly top tube and down tube / Hi-Ten steel
Brakes and controls:
- Gyro compatibility: Frame prepared for a gyro
- Brake: Éclat Talon U-brake
Fork:
- Fork: Salt AM; chromoly steerer; 26 mm offset
Handlebars:
- Handlebar: Height (G): 9 in; width (H): 29.5 in
Stem:
- Stem: Aluminium, top load
Wheels and rims:
- Rims: 20 in, 36H, 36 mm wide
Tyres:
- Tyres: 20 x 2.35 in
Bottom bracket:
- Bottom bracket: Mid BB, cartridge bearings
Chainring or sprocket:
- Sprocket: 25T
Chain:
- Chain: Salt AM
Front hub:
- Front hub: 10 mm axle, cartridge bearings
Hubs and guards:
- Hub guards: Salt Pro, four: front and rear
Saddle and seatpost:
- Saddle and seatpost: Pivotal
- Seat clamp: Aluminium
Grips and bar ends:
- Grips: 154 mm
Pedals:
- Pedals: Nylon / fibreglass
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency