
Total Killabee 20-inch BMX bike, 20.5-inch TT | Teal
Description
Total Killabee 20-inch BMX bike, 20.5-inch TT — a complete setup for skatepark practice:
Key features
- Suggested rider height: Approx. 150–175 cm
- Top tube length (TT / A): 20.5 in
- Wheel size: 20 in
- Bar: Height (G): 9.5 in; width (H): 29.5 in
- Cranks: Three-piece 4130 chromoly, 170 mm
- Weight: 11.3 kg
- Rider level: Beginner to intermediate
Looking for a complete BMX to practise on at the skatepark? The Total Killabee combines a 20.5-inch top tube with 20-inch wheels, a rear U-brake and a cassette hub. Its 4130 chromoly three-piece cranks and double-wall rims give you a complete freestyle setup without choosing every component separately.
Check the frame size, not just the wheels
The 20-inch figure refers to the wheels. The frame has a 20.5-inch top tube, marked TT in the geometry below. The suggested height range is approximately 150–175 cm; body proportions and riding preference matter too. Compare the top tube, 13.25-inch chainstays and 8.2-inch standover with a bike you know before choosing.
A setup you can maintain
The 170 mm cranks use a 19 mm sealed Mid bottom bracket, with a 25T sprocket and 9T cassette driver. The rear U-brake lets you control your speed. The frame has mounts for a gyro, giving you the option to investigate a compatible rotor setup later; gyro compatibility does not mean a gyro is included.
The Hi-Ten fork has a 30 mm offset and is listed as peg-ready. Check axle and peg compatibility before adding pegs, especially with the 12 mm rear axle. This is a bike for learning and practising within its limits, with regular checks as your riding becomes more demanding.
Total Killabee 20-inch BMX bike, 20.5-inch TT — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 150–175 cm
- Wheel size: 20 in
- Weight: 11.3 kg
- Rider level: Beginner to intermediate
Frame geometry:
- Top tube length (TT / A): 20.5 in
- Chainstay length (CS / B): 13.25 in
- Head tube angle (HA / C): 75.25°
- Seat tube angle (SA / D): 71°
- Bottom bracket height (BB / E): 11.5 in
- Standover height (SO / F): 8.2 in
Handlebars:
- Bar: Height (G): 9.5 in; width (H): 29.5 in
- Handlebar material: 1020 Hi-Ten steel
Cranks:
- Cranks: Three-piece 4130 chromoly, 170 mm
Frame:
- Frame material: 1020 Hi-Ten steel
- Frame details: CNC-machined head tube, gyro-ready; top tube and down tube gussets; tapered rear triangle; integrated seat clamp
Fork:
- Fork: 1020 Hi-Ten steel; tapered legs; 30 mm offset; 7075 aluminium top cap; peg-ready
Stem:
- Stem: Aluminium, front load, 50 mm
Wheels and rims:
- Rims: Double wall, 36H
Tyres:
- Tyres: 20 in
Headset:
- Headset: Integrated
Bottom bracket:
- Bottom bracket: Mid BB, sealed cartridge bearings, 19 mm
Chainring or sprocket:
- Sprocket: 25T
Front hub:
- Front hub: 36H; 10 mm chromoly axle; loose ball bearings
Rear hub and driver:
- Rear hub: Cassette, 36H; 12 mm chromoly axle; semi-sealed; 9T driver
Brakes and controls:
- Brake: Rear U-brake
Saddle and seatpost:
- Saddle: Total Killabee one-piece combo
Pedals:
- Pedals: Nylon, 9/16 in
Grips and bar ends:
- Grips: Mushroom style
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency