Stolen Casino XL 20-inch BMX bike, 21-inch TT — a longer cockpit for taller beginners:

Key features

• Suggested rider height: Approx. 180 cm and taller
• Top tube length (TT / A): 21 in
• Wheel size: 20 x 2.3 in
• Cranks: Fiction Zeus, three-piece 4130 chromoly, 165 mm
• Bar: Height (G): 8.75 in
• Weight: 11.68 kg

The Stolen Casino XL gives taller beginners a longer 21-inch top tube, with Fiction Zeus three-piece 4130 chromoly cranks and Fiction Atlas tyres in a complete BMX setup. That saves you the job of selecting each component separately.

Choose the top tube for your position

The frame size is 21 inches TT; the wheels are 20 inches. The suggested rider height is approximately 180 cm and taller. Use that as a starting point and compare the geometry with your proportions and a bike you can control comfortably. The chainstays measure 13.75 inches, with 8.75-inch Tallboy bars.

Control and routine maintenance

The 25T sprocket and 9T cassette driver make up the gearing. A 19 mm sealed Mid bottom bracket supports the cranks, while the rear APSE U-brake lets you manage speed. Fiction Moto combo seating, 160 mm Stolen Loot grips and Wellgo PC pedals complete the contact points.

The frame and fork are 1020 Hi-Ten steel. Check the bike before each session and keep it adjusted as your riding becomes more demanding.

Stolen Casino XL 20-inch BMX bike, 21-inch TT — specifications:

Sizing, weight and other details:

• Suggested rider height: Approx. 180 cm and taller
• Wheel size: 20 x 2.3 in
• Weight: 11.68 kg

Frame geometry:

• Top tube length (TT / A): 21 in
• Chainstay length (CS / B): 13.75 in
• Head tube angle (HA / C): 74.5°
• Seat tube angle (SA / D): 71°

Cranks:

• Cranks: Fiction Zeus, three-piece 4130 chromoly, 165 mm

Handlebars:

• Bar: Height (G): 8.75 in
• Handlebar material: Tallboy, 1020 Hi-Ten steel

Frame:

• Frame: 1020 Hi-Ten steel, integrated seat clamp

Fork:

• Fork: 1020 Hi-Ten steel, tapered legs, 32 mm offset

Stem:

• Stem: Fiction Spartan XS, aluminium, top load

Headset:

• Headset: Standard 1 1/8 in, threadless

Wheels and rims:

• Rims: Fiction Trojan, 20 in, 36H

Tyres:

• Tyres: Fiction Atlas, 20 x 2.3 in

Chainring or sprocket:

• Sprocket: Stolen, 25T

Front hub:

• Front hub: Aluminium, 10 mm chromoly axle, 36H, loose ball bearings

Rear hub and driver:

• Rear hub: Stolen Rampage, aluminium cassette hub, 12 mm chromoly axle, 36H, 9T driver

Bottom bracket:

• Bottom bracket: Mid BB, 19 mm, sealed cartridge bearings

Chain:

• Chain: Z-410

Brakes and controls:

• Rear brake: APSE aluminium U-brake

Brake levers:

• Brake lever: APSE aluminium, hinged clamp

Saddle and seatpost:

• Saddle: Fiction Moto combo, 200 mm seatpost

Pedals:

• Pedals: Wellgo PC, boron spindles, 9/16 in

Grips and bar ends:

• Grips: Stolen Loot, 160 mm
• Bar ends: Stolen Vortex Rubber

Safety while riding

Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.

Frame geometry diagram

Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.