
SE Bikes So Cal Flyer 24-inch wheelie cruiser | Matte Black
Last item (ready for dispatch)
Description
SE Bikes So Cal Flyer 24-inch wheelie cruiser — a 24-inch single-speed setup for younger Bike Life riders:
Key features
- Suggested rider height: Approx. 130–160 cm
- Wheel size: 24 in
- Top tube length (TT): 21.3 in
- Frame: 6061 aluminium Floval tubing
- Tyres: SE Bozack, 24 x 2.4 in
- Cranks: SE three-piece chromoly, 170 mm
- Drivetrain: 33T / 14T freewheel
- Brake: Promax V-brake
- Weight: Approx. 12.20 kg
A 24-inch Bike Life setup
The So Cal Flyer gives you a 24-inch option for cruising and wheelie-focused riding. Its 33T chainring and 14T freewheel keep the drivetrain simple: there are no gear changes to operate, and you can coast without turning the pedals. SE wheelie pegs and aluminium valve caps are included.
Check the size, then adjust your position
The suggested rider height is around 130–160 cm. Compare the 21.3-inch top tube, 26.4-inch standover and 55 mm stem reach with a bike you know. Check that you can reach the bar and operate the brake comfortably. The top tube length is a frame measurement; the wheels are 24 inches.
The railed Captive saddle and Race Rocker Micro-Adjust seatpost let you adjust the seated position within the saddle and post limits. The bar measures 28.5 inches wide with a 6.5-inch rise. In the SE diagram, H measures standover from the ground to the top tube; B is the separate seat tube measurement.
A straightforward brake and drivetrain
The Promax V-brake uses a two-finger lever. Have the brake adjusted before riding and check its operation before each session. The 170 mm three-piece chromoly cranks run with a 19 mm Mid bottom bracket and KMC S1 chain.
Frame and wheels
A 6061 aluminium Floval-tube frame is paired with a full-chromoly Landing Gear fork. The wheels have double-wall aluminium rims and fully sealed SE Racing hubs. SE Bozack tyres measure 24 x 2.4 inches.
SE Flangeless Mushroom Wing grips and nylon platform pedals complete the contact points. Practise in a suitable area away from traffic and other people, and inspect the bike before every ride.
SE Bikes So Cal Flyer 24-inch wheelie cruiser — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 130–160 cm
- Wheel size: 24 in
- Weight: Approx. 12.20 kg
- Included accessories: Aluminium valve caps and SE wheelie pegs
Frame geometry:
- Top tube length (TT): 21.3 in
- Seat tube length (B, centre to top): 12.5 in
- Seat tube angle (C): 72°
- Head tube angle (D): 73.5°
- Chainstay length (E): 16.25 in
- Wheelbase (F): 39.5 in
- Bottom bracket height (G, from the ground): 12.4 in
- Standover height (H, from the ground to the top tube): 26.4 in
Frame:
- Frame: 6061 aluminium Floval tubing
- Frame details: Integrated headset, wide rear stays, SE Wave dropouts
Tyres:
- Tyres: SE Bozack, 24 x 2.4 in
Cranks:
- Cranks: SE three-piece chromoly, 170 mm
Drivetrain:
- Drivetrain: 33T / 14T freewheel
- Freewheel: 14T
Brakes and controls:
- Brake: Promax V-brake
Fork:
- Fork: SE Landing Gear, 100% chromoly, 24 in
Handlebars:
- Bar: SE Big Honkin Cruiser, two-piece; 28.5 in width, 6.5 in rise; 10° backsweep, 1° upsweep
Stem:
- Stem: SE Bike Life, aluminium, top load, 55 mm reach
Headset:
- Headset: FSA Internal, integrated, cartridge bearings
Wheels and rims:
- Rims: SE Racing, aluminium, 24 in, double wall, 36H
Bottom bracket:
- Bottom bracket: Mid BB, 19 mm, cartridge bearings
Chainring or sprocket:
- Chainring: SE Racing, 33T
Front hub:
- Front hub: SE Racing, aluminium, fully sealed cartridge bearings, 36H
Rear hub and driver:
- Rear hub: SE Racing flip-flop, aluminium, fully sealed cartridge bearings, 36H
Brake levers:
- Brake lever: Promax, two-finger
Chain:
- Chain: KMC S1
Saddle and seatpost:
- Saddle: SE Captive, railed, with Custom SE Bottle Opener Brace
- Seatpost: Race Rocker Micro-Adjust, aluminium, for a railed saddle, 27.2 mm
- Seat clamp: SE, aluminium, 31.8 mm
Grips and bar ends:
- Grips: SE Flangeless Mushroom Wing with SE rubber end plugs
Pedals:
- Pedals: SE Nylon platforms
Safety while riding
Wheelie practice and street riding put loads through the bike. Falls and impacts can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency