
SE Bikes Big Flyer HD 29-inch wheelie cruiser | Black Bruiser
Description
SE Bikes Big Flyer HD 29-inch wheelie cruiser — a single-speed Bike Life setup for cruising and wheelie practice:
Key features
- Suggested rider height: Approx. 165 cm and above
- Wheel size: 29 in
- Frame: SE Flyer, 6061 aluminium Floval tubing
- Top tube length (TT): 23.6 in / 599 mm
- Tyres: SE Bozack, 29 x 2.4 in
- Cranks: SE three-piece chromoly, 170 mm
- Drivetrain: 36T / 17T freewheel
- Brake: Tektro HD-M281 hydraulic disc, 180 mm rotor
- Weight: Approx. 14.51 kg
A big-wheel Bike Life setup
The Big Flyer HD pairs 29-inch wheels with a 6061 aluminium Floval-tube frame for cruising and wheelie-focused riding. Its freewheel lets you coast without turning the pedals, while the single-speed 36/17 drivetrain keeps gear changes out of the ride.
Set a riding position that suits you
The railed saddle and Micro-Adjust seatpost let you adjust your seated position within the saddle and post limits. The bar is 30 inches wide with a 6-inch rise. Compare the 23.6-inch top tube and 30.9-inch standover with a bike you know before choosing.
The suggested rider height is around 165 cm and above. Use it as a guide, then check reach and frame clearance. In the SE diagram, H is the standover height measured from the ground to the top tube. It is a different measurement from the 16.9-inch seat tube length marked B.
Hydraulic disc braking
The HD has a Tektro HD-M281 hydraulic disc brake with a 180 mm rotor and a two-finger lever. The lever is designed to be operated with two fingers, leaving the others around the grip. Have the brake adjusted before riding and make sure the lever is within comfortable reach.
Parts for everyday rides with your crew
A full-chromoly Landing Gear fork, double-wall aluminium rims and SE Bozack 29 x 2.4-inch tyres complete the big-wheel layout. The build includes 170 mm three-piece chromoly cranks, nylon fibre platform pedals, aluminium valve caps and SE wheelie pegs.
Practise only in a suitable riding area, away from traffic and other people. Check the wheels, brake, drivetrain and fixings before every ride, and stop if anything is loose or damaged.
SE Bikes Big Flyer HD 29-inch wheelie cruiser — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 165 cm and above
- Wheel size: 29 in
- Weight: Approx. 14.51 kg
- Included accessories: Aluminium valve caps and SE wheelie pegs
Frame:
- Frame: SE Flyer, 6061 aluminium Floval tubing
- Frame details: Integrated headset, wide rear stays, SE Wave dropouts
Frame geometry:
- Top tube length (TT): 23.6 in / 599 mm
- Seat tube length (B, centre to top): 16.9 in / 429 mm
- Seat tube angle (C): 71°
- Head tube angle (D): 71°
- Chainstay length (E): 18.1 in / 460 mm
- Wheelbase (F): 43.4 in / 1102 mm
- Bottom bracket height (G, from the ground): 12.24 in / 311 mm
- Standover height (H, from the ground to the top tube): 30.9 in / 785 mm
Tyres:
- Tyres: SE Bozack, 29 x 2.4 in
Cranks:
- Cranks: SE three-piece chromoly, 170 mm
Drivetrain:
- Drivetrain: 36T / 17T freewheel
- Freewheel: 17T
Brakes and controls:
- Brake: Tektro HD-M281 hydraulic disc, 180 mm rotor
Fork:
- Fork: SE Landing Gear, full chromoly, 29 in
Handlebars:
- Bar: SE Big Honkin Cruiser, two-piece; 30 in / 762 mm width, 6 in / 152 mm rise; 10° backsweep, 1° upsweep
Stem:
- Stem: SE Bike Life, aluminium, top load, 48 mm reach
Headset:
- Headset: FSA Internal, integrated, cartridge bearings
Wheels and rims:
- Rims: Aluminium, 29 in, double wall, 36H
Bottom bracket:
- Bottom bracket: Mid BB, 19 mm, cartridge bearings
Chainring or sprocket:
- Chainring: SE Racing, 36T
Front hub:
- Front hub: SE Racing, aluminium, 36H
Rear hub and driver:
- Rear hub: SE Racing, aluminium, 135 mm, disc brake compatible, sealed bearings, 36H; 17T freewheel
Brake levers:
- Brake lever: Tektro HD-M281, two-finger
Chain:
- Chain: KMC S1
Saddle and seatpost:
- Saddle: SE Captive, railed
- Seatpost: Micro-Adjust, 27.2 mm
- Seat clamp: SE
Grips and bar ends:
- Grips: SE Flangeless Mushroom Wing with SE rubber end plugs
Pedals:
- Pedals: SE Nylon Fiber platforms
Safety while riding
Wheelie practice and street riding put loads through the bike. Falls and impacts can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency