
Radio Valac 20-inch BMX bike, 20.75-inch TT | Laguna Green Fade
Last item (ready for dispatch)
Description
Radio Valac 20-inch BMX bike, 20.75-inch TT — a complete setup for intermediate riders:
Key features
- Suggested rider height: Approx. 160–180 cm
- Top tube length (TT / A): 20.75 in
- Wheel size: 20 x 2.35 in
- Cranks: Three-piece chromoly, 165 mm
- Bar: Height (G): 9 in; width (H): 29.5 in
- Weight: 12.33 kg
- Rider level: Intermediate
The Radio Valac combines a full chromoly fork and handlebar with double-wall rims in a complete BMX for intermediate riders. The frame uses 4130 chromoly in the top tube, down tube and chainstays, alongside 1020 Hi-Ten steel.
Compare the frame with your riding position
The 20-inch wheel size is separate from the 20.75-inch top tube length, marked TT. The suggested rider height is approximately 160–180 cm. Use that as a guide, then compare the top tube, 13.2-inch chainstays and bar dimensions with your proportions and a bike you already know.
Room to adjust your setup
The 9-inch bar rise, 29.5-inch width and 165 mm three-piece chromoly cranks are useful dimensions to compare with your current bike. The fork has a 26 mm offset, with 20 x 2.35-inch tyres on double-wall rims.
The frame has removable brake fittings and is prepared for a gyro. That gives you options when setting up the bike for its intended environment; have a qualified mechanic check compatibility before modifying the braking system. The bike has a U-brake for controlling speed.
Radio Valac 20-inch BMX bike, 20.75-inch TT — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 160–180 cm
- Wheel size: 20 x 2.35 in
- Weight: 12.33 kg
- Rider level: Intermediate
Frame geometry:
- Top tube length (TT / A): 20.75 in
- Chainstay length (CS / B): 13.2 in
- Head tube angle (HA / C): 76°
Cranks:
- Cranks: Three-piece chromoly, 165 mm
Handlebars:
- Bar: Height (G): 9 in; width (H): 29.5 in
- Handlebar material: Full chromoly
Frame:
- Frame material: 4130 chromoly top tube, down tube and chainstays / 1020 Hi-Ten
Brakes and controls:
- Gyro compatibility: Frame prepared for a gyro
- Rear brake: U-brake, aluminium
- Brake fittings: Removable brake hardware
Fork:
- Fork: Full chromoly, tapered legs, 26 mm offset
Stem:
- Stem: Aluminium, top load
Wheels and rims:
- Rims: 20 in, 36H, double wall
Tyres:
- Tyres: 20 x 2.35 in
Bottom bracket:
- Bottom bracket: Mid BB, 19 mm
Chain:
- Chain: Salt AM WZ1
Brake levers:
- Brake lever: Aluminium
Saddle and seatpost:
- Saddle: Combo
- Seat clamp: Aluminium
Pedals:
- Pedals: Nylon / fibreglass
Grips and bar ends:
- Grips: 160 mm
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency