
Radio Revo 20-inch BMX bike, 20-inch TT | Perfect Olive
Last item (ready for dispatch)
Description
Radio Revo 20-inch BMX bike, 20-inch TT — check the fit for your first freestyle sessions:
Key features
- Suggested rider height: Approx. 145–160 cm
- Top tube length (TT / A): 20 in
- Wheel size: 20 x 2.20 in
- Cranks: Radio Rookie OPC, forged one-piece 4130 chromoly, 170 mm
- Bar: 8.75 in rise (G), 29 in width (H)
- Weight: 12.22 kg
Starting with freestyle? The Radio Revo gives you a complete 20-inch setup with a 25T sprocket, 9T cassette driver and rear U-brake. You can practise the basics with the brake ready to manage your speed.
A straightforward first setup
The Hi-Ten frame is paired with a fork that uses a chromoly steerer and tapered Hi-Ten legs. A forged, one-piece 170 mm chromoly crank turns in a US bottom bracket. The Century Combo saddle combines the seat and post in one unit, keeping saddle setup straightforward.
Check the frame and wheel sizes
The suggested rider height is approximately 145–160 cm. The 20-inch figure refers to the wheels; 20-inch TT is the top tube length. Compare the frame dimensions and 8.75-inch bar rise with the rider’s proportions and a bike they know. Height ranges are a starting point, and personal preference also matters.
Radio Revo 20-inch BMX bike, 20-inch TT — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 145–160 cm
- Wheel size: 20 x 2.20 in
- Weight: 12.22 kg
- Rider level: Beginner
Frame geometry:
- Top tube length (TT / A): 20 in
- Chainstay length (CS / B): 13 in
- Head tube angle (HA / C): 75°
- Seat tube angle (SA / D): 71.5°
- Bottom bracket height (BB / E): 11.75 in
- Standover height (SO / F): 7.8 in
Cranks:
- Cranks: Radio Rookie OPC, forged one-piece 4130 chromoly, 170 mm
Handlebars:
- Bar: 8.75 in rise (G), 29 in width (H)
- Handlebar: Radio Revo, 1020 Hi-Ten steel
Frame:
- Frame: Radio Revo, Hi-Ten steel
Fork:
- Fork: Radio AM 20, 4130 chromoly steerer, 1020 Hi-Ten legs; tapered legs
Stem:
- Stem: Salt AM, aluminium, top load
Headset:
- Headset: FSA
Wheels and rims:
- Rims: Salt AM, 20 in, 36H
Tyres:
- Tyres: Radio Rookie 20 x 2.20 in
Chainring or sprocket:
- Sprocket: Radio Rookie, 25T
Bottom bracket:
- Bottom bracket: US BB
Front hub:
- Front hub: Radio Rookie, 10 mm chromoly axle, 36H
Rear hub and driver:
- Rear hub: Radio Rookie, cassette, 14 mm chromoly axle, 36H, 9T driver
Chain:
- Chain: KMC S1
Brakes and controls:
- Rear brake: Radio AM, aluminium U-brake
Brake levers:
- Brake lever: Radio AM
Saddle and seatpost:
- Saddle: Radio Century Combo
- Seat clamp: Radio Slim, forged aluminium
Pedals:
- Pedals: Radio Rookie, nylon
Grips and bar ends:
- Grips: Radio AM, flangeless, 150 mm
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency