
Radio Darko XL 20-inch BMX bike, 21-inch TT | Neptun Green
Last item (ready for dispatch)
Description
Radio Darko XL 20-inch BMX bike, 21-inch TT — a street setup with adjustable options:
Key features
- Suggested rider height: Approx. 180 cm and taller
- Top tube length (TT / A): 21 in
- Wheel size: 20 x 2.35 in
- Cranks: Three-piece 4130 chromoly, 170 mm
- Bar: Height (G): 9 in; width (H): 29.5 in
- Weight: 12.15 kg
- Riding style: Street
The Radio Darko XL gives taller street riders a 21-inch top tube. A Radio Century Fat combo seat and 160 mm flangeless Radio AM XL grips provide the contact points, with 170 mm three-piece chromoly cranks in the drivetrain.
Compare the frame with your riding position
The 20-inch wheel size is separate from the 21-inch top tube length, marked TT. The suggested rider height is approximately 180 cm and taller. Use that as a guide, then compare the top tube, 13.2-inch chainstays and bar dimensions with your proportions and a bike you already know.
A setup you can adapt
The frame has removable brake fittings and is prepared for a gyro, giving you options when setting up the bike for its intended riding environment. The bike is supplied with a rear brake and Radio Slic cable. Have a qualified mechanic check compatibility and setup before changing the braking system.
Salt Fraction rims carry Saltplus Burn 20 x 2.35-inch tyres. The frame uses chromoly in the top tube and down tube, combined with Hi-Ten steel. A 25T Radio Vision sprocket and 9T cassette driver make up the gearing.
Radio Darko XL 20-inch BMX bike, 21-inch TT — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 180 cm and taller
- Wheel size: 20 x 2.35 in
- Weight: 12.15 kg
- Riding style: Street
Frame geometry:
- Top tube length (TT / A): 21 in
- Chainstay length (CS / B): 13.2 in
- Head tube angle (HA / C): 75°
- Seat tube angle (SA / D): 71°
- Bottom bracket height (BB / E): 11.7 in
- Standover height (SO / F): 8.9 in
Cranks:
- Cranks: Three-piece 4130 chromoly, 170 mm
- Crank model: Radio AM Tubular
Handlebars:
- Bar: Height (G): 9 in; width (H): 29.5 in
- Handlebar material: Radio Darko, 1020 Hi-Ten
Frame:
- Frame material: 4130 chromoly top tube and down tube / 1020 Hi-Ten
Brakes and controls:
- Gyro compatibility: Frame prepared for a gyro
- Rear brake: Radio AM aluminium rear brake
- Brake cable: Radio Slic
- Brake fittings: Removable brake hardware
Fork:
- Fork: Radio AM 20, 4130 chromoly steerer, 1020 Hi-Ten legs, tapered legs
Stem:
- Stem: Aluminium, top load, Salt Pro
Wheels and rims:
- Rims: Salt Fraction, 20 in, 36H
Tyres:
- Tyres: Saltplus Burn, 20 x 2.35 in
Headset:
- Headset: Salt Pro, integrated
Chainring or sprocket:
- Sprocket: Radio Vision, 25T
Front hub:
- Front hub: Radio AM, 10 mm chromoly axle, 36H
Rear hub and driver:
- Rear hub: Radio AM cassette, 14 mm chromoly axle, 36H, 9T driver, cartridge bearings
Bottom bracket:
- Bottom bracket: Mid BB, 19 mm, cartridge bearings
Chain:
- Chain: Salt AM WZ1
Brake levers:
- Brake lever: Radio AM
Saddle and seatpost:
- Saddle: Radio Century Fat combo
- Seat clamp: Radio Slim, forged aluminium
Pedals:
- Pedals: Radio Pro, nylon / fibreglass, 9/16 in
Grips and bar ends:
- Grips: Radio AM XL, flangeless, 160 mm
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency