
Radio Cobalt Pro XL 20-inch BMX race bike | Magic Olive
Last item (ready for dispatch)
Description
Radio Cobalt Pro XL 20-inch BMX race bike — get set for your first track sessions:
Key features
- Suggested rider height: Approx. 180 cm and above
- Top tube length (TT / A): 21.25 in
- Material: 6061 aluminium frame
- Wheel size: 20 in, double-wall rims
- Cranks: Three-piece forged aluminium, 175 mm
- Weight: Approx. 9.78 kg
- Use: BMX racing
Start training on a complete race bike
The Cobalt Pro XL gives you a complete BMX race setup for learning gate starts, practising track sections and entering your first races. The 6061 aluminium frame is paired with 175 mm forged aluminium cranks, so you can start with a complete build and work out your setup preferences through riding.
Compare frame length as well as wheel size
The 21.25-inch top tube is separate from the 20-inch wheel diameter. The XL has a longer top tube than the 20.75-inch Cobalt Pro, giving taller riders another frame length to compare. The suggested rider height is around 180 cm and above. If you already ride a race BMX, compare its frame and bar measurements with this bike before choosing.
Make chain adjustment easier
Integrated tensioners in the forged dropouts help you set the rear wheel position and chain tension after removing a wheel or servicing the drivetrain. Check wheel alignment and tighten the axle fixings correctly before riding.
The 44T sprocket and 16T freewheel give you a single-speed race drivetrain, with a KMC Z6 chain. The freewheel lets you coast without pedalling; it is a different setup from a freestyle cassette or freecoaster.
Sealed hubs for regular outdoor sessions
Sealed bearings in both hubs help limit dirt entering the bearing assemblies. They still need inspection and maintenance. The double-wall BX-32 rims are fitted with a 20 x 1.95-inch front tyre and a narrower 20 x 1.75-inch rear tyre.
The listed brake is a Radio Raceline Mini V-brake. Have the brake and controls adjusted for the rider, and check their operation before every session.
Radio Cobalt Pro XL 20-inch BMX race bike — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 180 cm and above
- Wheel size: 20 in, double-wall rims
- Weight: Approx. 9.78 kg
- Use: BMX racing
Frame geometry:
- Top tube length (TT / A): 21.25 in
- Chainstay length (CS / B): 14 in
- Head tube angle (HA / C): 74°
- Seat tube angle (SA / D): 72°
- Bottom bracket height (BB / E): 11.5 in
Frame:
- Material: 6061 aluminium frame
- Frame: 6061 aluminium, forged rear dropouts, integrated chain tensioners
Cranks:
- Cranks: Three-piece forged aluminium, 175 mm
- Crankset: Three-piece, forged aluminium, 175 mm
Fork:
- Fork: 4130 chromoly steerer, Hi-Ten steel legs, 30 mm offset
Handlebars:
- Handlebar: 4130 chromoly; 8 in rise (G), 28.3 in width (H)
Stem:
- Stem: Arise Cobalt, aluminium, top load
Headset:
- Headset: FSA No.28, integrated, sealed cartridge bearings
Wheels and rims:
- Rims: Radio Raceline BX-32, aluminium, 20 in, double wall, 36H
Tyres:
- Tyres: Arisun XLR8; front: 20 x 1.95 in; rear: 20 x 1.75 in
Bottom bracket:
- Bottom bracket: Radio Raceline, BSA square taper, sealed cartridge bearings
Chainring or sprocket:
- Sprocket: Aluminium, 44T
Front hub:
- Front hub: Radio Raceline Cobalt, CNC-machined aluminium, sealed cartridge bearings, chromoly 10 mm axle, 36H
Rear hub and driver:
- Rear hub: Radio Raceline Cobalt Flip Flop, CNC-machined aluminium, sealed cartridge bearings, chromoly 10 mm axle, 36H
Drivetrain:
- Freewheel: ATA, chromoly, 16T, for 1/2 x 3/32 in chain
Chain:
- Chain: KMC Z6, 1/2 x 3/32 in
Brakes and controls:
- Brake: Radio Raceline Mini, V-brake
Saddle and seatpost:
- Saddle: Radio Raceline Cobalt Pro combo
- Seat clamp: Radio Raceline
Pedals:
- Pedals: Radio Raceline Cobalt Pro
Grips and bar ends:
- Grips: Radio Raceline Cobalt, 130 mm
Safety while riding
BMX race training, jumps and hard landings put high loads through the bike. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency