NS Bikes Eccentric Lite 1 29-inch trail mountain bike — a fit and setup to suit your riding:

Key features

• Suggested rider height: Small: approx. 160–170 cm / Medium: 170–180 cm / Large: 180–190 cm
• Wheel size: 29 in
• Fork: RockShox Judy Silver TK Solo Air, 120 mm travel
• Drivetrain: Shimano Deore 1 x 12
• Brakes: Shimano MT410 hydraulic
• Frame: 6061-T6 aluminium hardtail

A hardtail for forest trails

The Eccentric Lite 1 combines a 66.5° head angle with 29-inch wheels and a 420 mm rear end. The wheels help you roll over roots and stones, while the compact rear end leaves room to move the bike beneath you on winding trails.

One shifter for changing gradients

The 32T chainring and 11–51T twelve-speed cassette give you ratios for climbs and flatter stretches without a front derailleur to manage. Hydraulic brakes put separate front and rear speed control at your fingertips.

Check the fit before choosing

The suggested height ranges are guides. Compare reach, standover clearance and riding position with a bike you ride comfortably. The geometry below is based on a 120 mm fork.

Plan your first ride

Pedals are not included. Fit a suitable pair and have the bike assembled and checked before riding. The tubeless-ready rims need compatible tyres, tape, valves and sealant for a tubeless setup.

NS Bikes Eccentric Lite 1 29-inch trail mountain bike — specifications:

Sizing, weight and other details:

• Suggested rider height: Small: approx. 160–170 cm / Medium: 170–180 cm / Large: 180–190 cm
• Wheel size: 29 in
• Rider level: Intermediate to advanced

Fork:

• Fork: RockShox Judy Silver TK Solo Air, 120 mm travel
• Fork axle: 110 x 15 mm Boost
• Fork steerer: 1.5 in tapered
• Fork version: Judy Silver TK E-MTB Solo Air, 44 mm offset

Drivetrain:

• Drivetrain: Shimano Deore 1 x 12
• Rear derailleur: Shimano Deore M6100, 12-speed
• Shifter: Shimano Deore M6100, 12-speed
• Cassette: Sunrace CSMZ800, 11–51T, 12-speed

Brakes and controls:

• Brakes: Shimano MT410 hydraulic
• Front brake: Shimano MT410, 180 mm rotor
• Rear brake: Shimano MT410, 180 mm rotor

Frame:

• Frame: 6061-T6 aluminium hardtail
• Frame construction: Custom formed and butted tubing, tapered integrated head tube
• Frame sizes: Small, Medium, Large
• Rear dropouts: 135 x 10 mm

Headset:

• Headset: GW integrated tapered IS42/IS52, cartridge bearings

Stem:

• Stem: NS Bikes Drop, 31.8 mm clamp, 50 mm length, −10°

Handlebars:

• Bar: NS Bikes, 760 mm width, 12 mm rise, 31.8 mm clamp

Grips and bar ends:

• Grips: NS Bikes Hold Fast

Saddle and seatpost:

• Seatpost: Kalloy, 31.6 mm diameter
• Saddle: WTB Volt Medium Steel

Wheels and rims:

• Rims: Octane One Solar, 29 in, 32H, tubeless ready
• Spokes: 14 mm nipples

Pedals:

• Pedals: Not included

Brake levers:

• Brake levers: Shimano MT410

Front hub:

• Front hub: NS Bikes, 110 x 15 mm Boost Disc, cartridge bearings

Rear hub and driver:

• Rear hub: NS Bikes Cassette, 135 x 10 mm, cartridge bearings

Tyres:

• Tyres: Maxxis Rekon EXO TR, 29 x 2.4 in WT, front and rear

Cranks:

• Cranks: Shimano Deore FC-MT510-1, 170 mm

Chainring or sprocket:

• Chainring: 32T

Bottom bracket:

• Bottom bracket: Shimano BSA, 73 mm

Chain:

• Chain: Shimano, 12-speed

Safety while riding

Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.