Kink Setup XL 2027 20-inch BMX bike, 21-inch TT — adjust the setup around your riding:

Key features

• Suggested rider height: above 180 cm
• Top tube length (TT / A): 21 in
• Wheel size: 20 x 2.4 in
• Cranks: Kink Ridge, three-piece 4130 chromoly, 170 mm
• Bar: 9.25 in rise (G), 29 in width (H)
• Weight: 12.29 kg

The Kink Setup XL gives you a 21-inch top tube with a 4130 chromoly head tube, top tube and down tube. The rest of the frame is 1020 Hi-Ten steel. The bar is full 4130 chromoly, and the Circuit fork pairs a chromoly steerer with tapered Hi-Ten legs.

Set the saddle angle to suit you

The Kink Plymouth Stealth saddle and 25.4 mm aluminium Mission post allow angle adjustment, so you can set the saddle position rather than being limited to a fixed Combo unit.

A sealed rear cassette hub

The Mission Engage rear hub uses fully sealed cartridge bearings and a 9T driver. The front Covert hub has loose ball bearings; the integrated headset and 19 mm Mid bottom bracket use cartridge bearings. Keep all of them checked and serviced.

The 170 mm Ridge cranks work with a 25T Breach sprocket. Kink Sever 20 x 2.4-inch tyres come fitted to Mission X7 rims, and the rear Cease V2 brake gives you a way to manage speed during practice.

Compare the reach before choosing

The XL version has a 21-inch top tube and a 9.25-inch bar rise, with a suggested rider height above 180 cm. The bar is 29 inches wide and the chainstays are 13.25 inches long. Compare those dimensions with your proportions and preferred riding position.

The frame is prepared for gyro fitting. Check compatibility and the parts needed before adding one.

Kink Setup XL 2027 20-inch BMX bike, 21-inch TT — specifications:

Sizing, weight and other details:

• Suggested rider height: above 180 cm
• Wheel size: 20 x 2.4 in
• Weight: 12.29 kg

Frame geometry:

• Top tube length (TT / A): 21 in
• Chainstay length (CS / B): 13.25 in
• Head tube angle (HA / C): 75°
• Seat tube angle (SA / D): 71°
• Bottom bracket height (BB / E): 11.6 in
• Standover height (SO / F): 9 in

Cranks:

• Cranks: Kink Ridge, three-piece 4130 chromoly, 170 mm

Handlebars:

• Bar: 9.25 in rise (G), 29 in width (H)
• Handlebar: Kink T900, full 4130 chromoly; backsweep: 12°; upsweep: 1°

Frame:

• Frame: Kink Setup, 4130 chromoly head tube, top tube and down tube; 1020 Hi-Ten elsewhere; prepared for gyro fitting

Fork:

• Fork: Kink Circuit, 4130 chromoly steerer, 1020 Hi-Ten tapered legs, 30 mm offset

Stem:

• Stem: Kink Bold HRD, aluminium, top load

Headset:

• Headset: Mission, integrated, cartridge bearings

Wheels and rims:

• Rims: Mission X7, 20 in, 36H

Tyres:

• Tyres: Kink Sever, 20 x 2.4 in

Bottom bracket:

• Bottom bracket: Mid BB, 19 mm, cartridge bearings

Chainring or sprocket:

• Sprocket: Mission Breach, 25T

Front hub:

• Front hub: Mission Covert, 10 mm chromoly axle, loose ball bearings, 36H

Rear hub and driver:

• Rear hub: Mission Engage cassette, fully sealed cartridge bearings, hollow 14 mm chromoly axle, 36H, 9T driver

Chain:

• Chain: Mission 410

Brakes and controls:

• Rear brake: Mission Cease V2
• Brake cable: Mission L3 Linear

Brake levers:

• Brake lever: Mission Token

Saddle and seatpost:

• Saddle: Kink Plymouth Stealth, adjustable angle
• Seatpost: Mission Stealth, aluminium, 25.4 mm
• Seat clamp: Mission Slim Clamp

Pedals:

• Pedals: Kink Hemlock

Grips and bar ends:

• Grips: Kink Ace Flangeless

Safety while riding

Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.

Frame geometry diagram

Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.