BMX 18" Kink Kicker key features:

• Rider height: 125–150 cm (4'1"–4'11")
• Frame: 18"
• Handlebar: height: 8", width: 28"
• Gyro / Rotor ready frame
• Weight: 11.24 kg
• Riding style: Street / Skatepark / Pump Track

Looking for the perfect first 18 inch BMX?

Kink Kicker 18" is built for younger riders who have outgrown small kids' bikes but are not quite ready for a full-size 20" BMX. The smaller frame and carefully matched geometry make learning freestyle riding much easier and more enjoyable.

Unlike many entry-level kids' bikes, the Kicker uses real BMX components found on larger freestyle models. Wide tyres, a 3-piece Cr-Mo crank, sealed MID bottom bracket, integrated headset and a 9T cassette hub give young riders the same riding experience as a full-size BMX.

The frame is gyro ready, making future upgrades simple. Finished in Gunmetal Grey with black components, the Kicker looks just as good as it rides.

Kink is one of the best-known BMX brands in the world, trusted by beginners and experienced riders alike. Their bikes are designed around proven freestyle geometry that helps riders progress with confidence.

Kink Kicker 18" BMX Bike

• Recommended for riders approximately 125–150 cm tall.
• An excellent first freestyle BMX bike.
• Includes the tools required for basic assembly.
• Assembly usually takes around 15 minutes.
• Free shipping within Poland.

Kink Kicker 18" detailed BMX specification:

BMX Handlebar:

*frame geometry diagram below, 1" = 25.4 mm

• Dimensions: height (G) 8", width (H) 28"
• Kink T800
• Hi-Ten 1020
• Backsweep: 12°
• Upsweep: 1°

BMX Fork:

• Kink Stryker
• 4130 Cr-Mo steerer tube
• 1020 Hi-Ten fork legs
• 32 mm offset

BMX Stem:

• Kink Bold HRD
• Aluminium
• Top Load

BMX Headset:

• Mission
• Integrated
• Sealed bearings

BMX Rims / Tyres:

• Rims: Mission X7 | 18" | 36H
• Tyres: Mission Tracker | 18" x 2.4"

BMX Cranks:

• Mission Triumph
• 3-piece
• 4130 Cr-Mo
• 152 mm

Bottom Bracket:

• MID
• Sealed bearings
• 19 mm spindle

BMX Sprocket:

• Mission Rank
• 25T

Front Hub:

• Mission Covert
• 10 mm (3/8") Cr-Mo axle
• 36H
• Ball bearings

Rear Hub:

• Mission Function Cassette
• 14 mm Hollow Cr-Mo axle
• Semi-sealed
• 36H
• 9T driver

BMX Chain:

• Mission 410

BMX Brake:

• Lever: Mission Token
• Rear brake: Mission Cease V2
• Mission L2 Linear brake cable

BMX Seat:

• Mission Cypress Slim Combo

Seat Clamp:

• Mission Slim Clamp

BMX Pedals:

• Kink Hemlock

BMX Grips:

• Kink Ace Grips

BMX Frame:

*frame geometry diagram below, 1" = 25.4 mm

• 1020 Hi-Ten
• (A) TT: 18"
• (B) CS: 12.25"
• (C) HA: 74.5°
• (D) SA: 71°
• (E) BB: 10.75"
• (F) SO: 7.5"
• Gyro / Rotor ready

Weight: 11.24 kg

FAQ

Freestyle BMX bikes are designed for jumps, spins and hard landings. Regular inspections and maintenance help keep your bike safe and performing at its best.

Important information about your new BMX bike:

• Please read the warranty and user manual before your first ride.
• Bikes ordered online are delivered approximately 90% assembled for safe shipping.
• Before riding you need to install the pedals, saddle, handlebars and, on some models, the front wheel.
• The manufacturer recommends a professional first service inspection. Keep the service receipt, as it may be required for warranty validation.

Ride safe. Add a BMX helmet and protective gear before your first session.