IMPORTANT!

Because of the specific construction of the Ethic Tenacity V2, this bar must not be shortened. Its structure is designed to maintain strength and integrity at the original length, so cutting it down is not recommended.

Important before you buy!

If the selected version states “Slit: YES”, the slit is already made at the factory – do not order an additional slit.

Ethic Tenacity V2 is a lightweight Cr-Mo stunt scooter bar built for strong, controlled street riding without unnecessary weight

Ethic Tenacity V2 key features:

• Material: 4130 Cr-Mo
• Height: 620 / 670 / 720 / 770 mm
• Width: 600 mm
• Outer diameter: 34.9 mm Oversized
• Inner diameter: 31.8 mm
• Compression: HIC / SCS
• SCS adapter: included
• BPM compatible: YES
• Weight: 890 / 920 / 950 / 995 g depending on height
• Slit: YES

Light enough for quick tricks, strong enough for hard street riding

The original Ethic Tenacity earned its reputation as a proper street T-Bar, and the V2 keeps that familiar feel while improving the areas that matter when you ride hard.

The new version uses welds that are 25% stronger while the redesigned multi-butted construction drops up to 70 g compared with the previous version. You get a bar that feels lighter when you move the scooter underneath you, without giving up the strength you want for heavier street tricks and landings.

Less weight makes the scooter easier to move

A lighter bar changes how the front end feels as soon as you start throwing the scooter around. Barspins require less effort, corrections in the air feel quicker and the scooter responds more naturally when you link tricks together.

The Tenacity V2 gives you that lighter response while keeping the solid feel of 4130 Cr-Mo. If you ride street and want strength without making the front end feel unnecessarily heavy, that balance is the main advantage here.

Four heights let you build the setup around your riding

You can choose between 620, 670, 720 and 770 mm, all with a 600 mm width. That gives you plenty of room to match the bar to your height and the way you like your scooter to feel.

• 620 mm – 890 g
• 670 mm – 920 g
• 720 mm – 950 g
• 770 mm – 995 g

If you prefer a lower, more compact cockpit, you can stay with one of the shorter options. If you want more height for a taller street setup, the 770 mm version gives you that straight from the box.

HIC or SCS gives you more freedom when building your scooter

The Tenacity V2 is compatible with both HIC and SCS. It comes with a factory slit for HIC, while the included SCS adapter covers the slit when you want to use the bar with an SCS setup.

The bar has a 34.9 mm Oversized outer diameter and a 31.8 mm inner diameter, so make sure the rest of your setup is compatible before ordering.

BPM compatibility lets you tune how the scooter rotates

The Tenacity V2 is prepared for Ethic's BPM, or Balance Point Modulation, system. This allows you to install internal weights and change how the scooter is balanced.

That gives you another way to fine-tune the way the deck moves through rotations. If you are already working on more technical tricks and care about exactly how the scooter responds in the air, BPM compatibility gives you extra room to adjust the setup to your preference.

Do not shorten the Ethic Tenacity V2

The construction of this bar is designed around its original length. Shortening it could affect the structure, so choose the correct height before ordering.

The Tenacity V2 must not be shortened.

Ethic Tenacity V2 detailed technical specification:

• Model: Ethic Tenacity V2
• Type: T-Bar
• Material: 4130 Cr-Mo
• Height: 620 mm / 670 mm / 720 mm / 770 mm
• Width: 600 mm
• Outer diameter: 34.9 mm Oversized
• Inner diameter: 31.8 mm
• Compression compatibility: HIC / SCS
• SCS adapter: included
• BPM compatible: yes
• Slit: yes
• 620 mm weight: 890 g
• 670 mm weight: 920 g
• 720 mm weight: 950 g
• 770 mm weight: 995 g
• V2 welds: 25% stronger than V1
• V2 weight reduction: up to 70 g compared with V1
• Bar shortening: not permitted

FAQ – Ethic Tenacity V2 stunt scooter bar