Dartmoor Streetfighter 26-inch mountain bike — a simple drivetrain for creative riding:

Key features

• Wheel size: 26 in
• Fork: Suntour XCM32 DS, 120 mm travel
• Drivetrain: Shimano Cues 1 x 9, 11–36T cassette
• Brakes: Tektro HD-J3120 hydraulic, two pistons, 180 mm rotors
• Suggested rider height: Approx. 160–175 cm
• Rider level: Beginner to intermediate

Ride to the spot, then stay for a session

The Streetfighter has nine gears rather than the fixed ratio of a singlespeed dirt bike. A 32T chainring and 11–36T cassette let you choose a ratio for the ride across town, a climb or the approach to the next section.

For pumptracks and easier flow trails

The 26-inch wheels use Shark double-wall rims and Kenda K-Rad tyres. The Suntour XCM32 DS fork has 120 mm of travel to help soften uneven ground. It is a 27.5-inch fork fitted to a complete bike with 26-inch wheels.

Tektro HD-J3120 hydraulic brakes use two-piston calipers and 180 mm rotors. Have the controls adjusted and test the brakes before riding. Choose routes, small jumps and park features within the bike’s intended use and your ability.

Check the position

The suggested rider height is approximately 160–175 cm and the effective top tube is 570 mm. Compare reach to the bar, standover clearance and saddle adjustment with a bike you ride comfortably.

Dartmoor Streetfighter 26-inch mountain bike — specifications:

Sizing, weight and other details:

• Wheel size: 26 in
• Suggested rider height: Approx. 160–175 cm
• Rider level: Beginner to intermediate

Fork:

• Fork: Suntour XCM32 DS, 120 mm travel
• Fork wheel size and axle: 27.5 in, 15 mm thru-axle

Drivetrain:

• Drivetrain: Shimano Cues 1 x 9, 11–36T cassette
• Cassette: Shimano Cues LG300, 11–36T, 9-speed
• Rear derailleur: Shimano Cues U3020
• Shifter: Shimano Cues U4000, 9-speed

Brakes and controls:

• Brakes: Tektro HD-J3120 hydraulic, two pistons, 180 mm rotors

Frame:

• Frame: Dartmoor Streetfighter, hydroformed 6061-T6 aluminium
• Frame rear axle: 135 x 10 mm

Frame geometry:

• Effective top tube: 570 mm

Handlebars:

• Bar: Dartmoor Tornado, aluminium, 750 mm width, 31.8 mm clamp

Stem:

• Stem: Dartmoor Viper, Short, aluminium, 31.8 mm clamp

Headset:

• Headset: Dartmoor Blink, cartridge bearings

Wheels and rims:

• Rims: Dartmoor Shark, 26 in, 32H, double-wall

Tyres:

• Tyres: Kenda K-Rad, 26 x 2.3 in, 30 TPI

Cranks:

• Cranks: Prowheel Charm, two-piece, aluminium, 165 mm

Chainring or sprocket:

• Chainring: 32T, 104 mm BCD

Chain:

• Chain: Shimano Cues LG500

Front hub:

• Front hub: Dartmoor Reel, 15 x 100 mm, 32H

Rear hub and driver:

• Rear hub: Aluminium, 135 x 10 mm, Shimano HG

Saddle and seatpost:

• Saddle: Dartmoor Player, railed
• Seatpost: Aluminium, 30.9 mm diameter, 300 mm length

Grips and bar ends:

• Grips: Dartmoor Maze Lite

Pedals:

• Pedals: Dartmoor Vibe

Warranty registration

Register your purchase to activate the stated two-year manufacturer’s warranty, following the terms supplied with your bike. Keep the purchase receipt and the receipt for the initial professional service.

Replacement parts under a claim

If a claim is accepted and the original product or part is unavailable, the manufacturer or seller may provide an equivalent replacement. Its appearance or construction may differ, while its functional specification remains suitable for the original intended use. This does not affect your statutory consumer rights.

Safety while riding

Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.