Dartmoor Shine Pro 26-inch dirt jump bike — a simple drivetrain for creative riding:

Key features

• Wheel size: 26 in
• Suspension travel: 100 mm front / 100 mm rear
• Fork: Marzocchi Bomber DJ
• Rear shock: Fox Float DPS, 210 x 50 mm
• Drivetrain: Singlespeed, 30T chainring / 13T driver
• Brake: SRAM DB4 hydraulic, four pistons, 160 mm SRAM Centerline rotor
• Weight: Approx. 12.25 kg

Rear suspension in a dirt jump bike

The Shine Pro combines a 100 mm Bomber DJ fork with a Fox Float DPS rear shock and 100 mm of rear frame travel. The suspension helps absorb bumps and impacts as you ride dirt, park and jump lines. Have the setup checked for your weight and the features you ride.

A fixed ratio for your approach

The 155 mm FSA Comet Heavy Duty cranks carry a 30T chainring, driving a 13T rear driver. You have one gear and no shifter to operate. Choose approaches that suit the ratio and your ability.

The 800 mm Nitro X-Hi bar and Beetle stem use a 31.8 mm clamp. A SRAM DB4 brake uses a 160 mm Centerline rotor. Pedals are not included, so choose a suitable pair before riding.

Check reach and clearance

The one-size frame is suggested for riders approximately 160 cm and taller. Compare the measurements below with a bike you know and check clearance in person.

Dartmoor Shine Pro 26-inch dirt jump bike — specifications:

Sizing, weight and other details:

• Wheel size: 26 in
• Weight: Approx. 12.25 kg
• Suggested rider height: Approx. 160 cm and taller

Rear suspension:

• Suspension travel: 100 mm front / 100 mm rear
• Rear shock: Fox Float DPS, 210 x 50 mm
• Shock mounting: 22.2 x 8 mm

Fork:

• Fork: Marzocchi Bomber DJ
• Fork wheel size and axle: 26 in, 20 x 110 mm thru-axle

Drivetrain:

• Drivetrain: Singlespeed, 30T chainring / 13T driver

Brakes and controls:

• Brake: SRAM DB4 hydraulic, four pistons, 160 mm SRAM Centerline rotor

Frame:

• Frame: Dartmoor Shine Pro, full suspension, 6061-T6 aluminium
• Frame size: One size
• Frame rear axle: 135 x 10 mm

Handlebars:

• Bar: Dartmoor Nitro X-Hi, aluminium, 800 mm width, 31.8 mm clamp

Stem:

• Stem: Dartmoor Beetle, aluminium, 31.8 mm clamp

Headset:

• Headset: Dartmoor Blink, IS42/IS52, cartridge bearings

Wheels and rims:

• Rims: Dartmoor Shield, 26 in, 32H, double-wall

Tyres:

• Tyres: Kenda K-Series Booster Park, 26 x 2.25 in, 120 TPI, folding

Bottom bracket:

• Bottom bracket: BSA/Euro, 73 mm

Cranks:

• Cranks: FSA Comet Heavy Duty, 155 mm

Chainring or sprocket:

• Chainring: 30T, direct mount

Front hub:

• Front hub: Dartmoor Reel Expert, cartridge bearings, 110 x 20 mm, 32H

Rear hub and driver:

• Rear hub: Dartmoor Reel Pro Singlespeed, cartridge bearings, female axle, 13T driver, 32H

Chain:

• Chain: Dartmoor Core

Saddle and seatpost:

• Saddle: Dartmoor Player, railed
• Seatpost: Aluminium, 30.9 mm diameter, 300 mm length

Grips and bar ends:

• Grips: Dartmoor Maze

Pedals:

• Pedals: Not included

Warranty registration

Register your purchase to activate the stated two-year manufacturer’s warranty, following the terms supplied with your bike. Keep the purchase receipt and the receipt for the initial professional service.

Safety while riding

Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.

Frame geometry