
Dartmoor Rocbird Enduro Intro 29-inch mountain bike | Anthracite Flash
Description
Dartmoor Rocbird Enduro Intro 29-inch mountain bike — lower the saddle and make room to move on descents:
Key features
- Wheel sizes: 29 in front and rear
- Suspension travel: 160 mm front / 160 mm rear
- Fork: Manitou Mezzer Expert
- Rear shock: RockShox Deluxe Select, 205 x 65 mm
- Drivetrain: Shimano Cues U6000 1 x 11, 11–50T cassette
- Brakes: SRAM DB4 hydraulic, four pistons, 180 mm SRAM Centerline rotors
- Seatpost: X-Fusion Manic LC dropper, 170 mm travel
- Weight: Approx. 16.00 kg
Pedal to the start, lower the saddle for the descent
The X-Fusion Manic LC dropper lets you raise the saddle for pedalling and lower it when you need more room to move above the bike. Listed travel is 170 mm. Check your saddle-height range as part of the setup.
Suspension for roots and rough ground
The Manitou Mezzer Expert fork works with a RockShox Deluxe Select rear shock. You get 160 mm of fork travel and 160 mm of rear frame travel. These are wheel-travel figures; the shock’s 205 x 65 mm size is a separate measurement.
For enduro trails and bikepark riding, have the suspension set for your weight according to its instructions, and choose routes within the bike’s intended use and your ability.
One shifter for changing gradients
The 32T chainring and 11–50T cassette give you a choice of ratios for climbs and faster sections. You use a single shifter, with no front derailleur to operate.
SRAM DB4 four-piston hydraulic disc brakes let you control front and rear braking separately. Have the levers and calipers adjusted and test their operation before riding.
The rims are tubeless ready. A conversion needs compatible tyres, the required tape, valves and sealant; check the compatibility of the complete setup before converting.
Find the position that fits you
Suggested rider heights are approximately 180–195 cm for Large and 190–205 cm for XL. Compare reach, standover clearance and saddle adjustment with a bike you ride comfortably. Height alone does not determine the right size.
Frame geometry
| Measurement | Large | XL |
|---|---|---|
| Reach | 490 mm | 520 mm |
| Effective top tube | 568 mm | 598 mm |
| Chainstay length | 441 mm | 441 mm |
| Head angle | 64° | 64° |
| Seat angle | 83° | 83° |
| BB drop | 33 mm | 33 mm |
| Stack | 635 mm | 635 mm |
| Wheelbase | 1272 mm | 1302 mm |
Dartmoor Rocbird Enduro Intro 29-inch mountain bike — specifications:
Sizing, weight and other details:
- Wheel sizes: 29 in front and rear
- Weight: Approx. 16.00 kg
- Rider level: Intermediate to advanced
Rear suspension:
- Suspension travel: 160 mm front / 160 mm rear
- Rear shock: RockShox Deluxe Select, 205 x 65 mm
- Rear shock spring: Air
- Rear shock mounting: Trunnion
Fork:
- Fork: Manitou Mezzer Expert
- Fork wheel size and axle: 29 in, 15 x 110 mm Boost thru-axle
Drivetrain:
- Drivetrain: Shimano Cues U6000 1 x 11, 11–50T cassette
- Cassette: Shimano Cues LG400, 11–50T
- Rear derailleur: Shimano Cues U6000, 1 x 11
- Shifter: Shimano Cues U6000, 11-speed
Brakes and controls:
- Brakes: SRAM DB4 hydraulic, four pistons, 180 mm SRAM Centerline rotors
Saddle and seatpost:
- Seatpost: X-Fusion Manic LC dropper, 170 mm travel
- Saddle: Dartmoor Arrow
- Seatpost diameter: 30.9 mm
Frame:
- Frame: Dartmoor Rocbird 29, full suspension, 6061-T6 aluminium
- Frame sizes: Large, XL
- Frame rear axle: 148 x 12 mm Boost
- Frame compatibility: SRAM UDH
Handlebars:
- Bar: Dartmoor Tornado Hi, aluminium, 780 mm width, 31.8 mm clamp
Stem:
- Stem: Dartmoor Shorty, aluminium, 31.8 mm clamp
Headset:
- Headset: Dartmoor Blink, IS42/IS52, cartridge bearings
Wheels and rims:
- Rims: Dartmoor Raptor, 29 in front and rear, 32H, tubeless ready
Cranks:
- Cranks: Shimano Cues U6000, 170 mm, single chainring
Chainring or sprocket:
- Chainring: 32T, 96 mm BCD
Front hub:
- Front hub: Dartmoor Reel Boost, cartridge bearings, 110 x 15 mm Boost, 32H
Rear hub and driver:
- Rear hub: Dartmoor Reel Boost, cartridge bearings, 148 x 12 mm Boost, 32H, Shimano HG freehub
Chain:
- Chain: Shimano LG500
Grips and bar ends:
- Grips: Dartmoor Maze
Pedals:
- Pedals: Dartmoor Vibe
Bottom bracket:
- Bottom bracket: BSA/Euro, 73 mm
Tyres:
- Front tyre: Kenda K-Series Double Black, 29 x 2.4 in, 60 TPI, folding
- Rear tyre: Kenda K-Series Double Black, 29 x 2.4 in, 60 TPI, folding
Safety while riding
Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
If the manufacturer requires registration after purchase, follow the instructions supplied with the bike.
Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency