
Dartmoor Rocbird Enduro Evo 29-inch mountain bike | Brushed Silver
Description
Dartmoor Rocbird Enduro Evo 29-inch mountain bike — lower the saddle and make room to move on descents:
Key features
- Wheel sizes: 29 in front and rear
- Suspension travel: 160 mm front / 160 mm rear
- Fork: RockShox Lyrik Select Charger RC
- Rear shock: RockShox Super Deluxe Base, 205 x 65 mm
- Drivetrain: SRAM Eagle 70 Transmission 1 x 12, 10–52T cassette
- Brakes: Magura MT Thirty hydraulic, four pistons, 203 mm front / 180 mm rear rotors
- Seatpost: X-Fusion Manic dropper, 170 mm (Large) / 200 mm (XL) travel
- Weight: Approx. 16.20 kg
Pedal to the start, lower the saddle for the descent
The X-Fusion Manic dropper lets you raise the saddle for pedalling and lower it when you need more room to move above the bike. Listed travel is 170 mm (Large) / 200 mm (XL). Check your saddle-height range as part of the setup.
Suspension for roots and rough ground
The RockShox Lyrik Select Charger RC fork works with a RockShox Super Deluxe Base rear shock. You get 160 mm of fork travel and 160 mm of rear frame travel. These are wheel-travel figures; the shock’s 205 x 65 mm size is a separate measurement.
For enduro trails and bikepark riding, have the suspension set for your weight according to its instructions, and choose routes within the bike’s intended use and your ability.
One shifter for changing gradients
The 30T chainring and 10–52T cassette give you a choice of ratios for climbs and faster sections. You use a single shifter, with no front derailleur to operate. Eagle 70 Transmission mounts directly to the frame’s compatible interface, without a conventional derailleur hanger.
Magura MT Thirty four-piston hydraulic disc brakes let you control front and rear braking separately. Have the levers and calipers adjusted and test their operation before riding.
The rims are tubeless ready. A conversion needs compatible tyres, the required tape, valves and sealant; check the compatibility of the complete setup before converting.
Find the position that fits you
Suggested rider heights are approximately 180–195 cm for Large and 190–205 cm for XL. Compare reach, standover clearance and saddle adjustment with a bike you ride comfortably. Height alone does not determine the right size.
Frame geometry
| Measurement | Large | XL |
|---|---|---|
| Reach | 490 mm | 520 mm |
| Stack | 635 mm | 635 mm |
| Seat tube length | 453 mm | 453 mm |
| Effective top tube | 568 mm | 598 mm |
| Chainstay length | 441 mm | 441 mm |
| Head tube length | 120 mm | 120 mm |
| Head angle | 64° | 64° |
| Effective seat angle | 83° | 83° |
| BB drop | 33 mm | 33 mm |
| Wheelbase | 1272 mm | 1302 mm |
| Standover | 805 mm | 805 mm |
Dartmoor Rocbird Enduro Evo 29-inch mountain bike — specifications:
Sizing, weight and other details:
- Wheel sizes: 29 in front and rear
- Weight: Approx. 16.20 kg
Rear suspension:
- Suspension travel: 160 mm front / 160 mm rear
- Rear shock: RockShox Super Deluxe Base, 205 x 65 mm
- Rear shock spring: Air
Fork:
- Fork: RockShox Lyrik Select Charger RC
- Fork wheel size and axle: 29 in, 15 x 110 mm Boost thru-axle
Drivetrain:
- Drivetrain: SRAM Eagle 70 Transmission 1 x 12, 10–52T cassette
- Cassette: SRAM XS-1270 Eagle Transmission, 10–52T
- Rear derailleur: SRAM Eagle 70 Transmission, 1 x 12
- Shifter: SRAM Eagle 70 Transmission, 12-speed
Brakes and controls:
- Brakes: Magura MT Thirty hydraulic, four pistons, 203 mm front / 180 mm rear rotors
Saddle and seatpost:
- Seatpost: X-Fusion Manic dropper, 170 mm (Large) / 200 mm (XL) travel
- Saddle: Dartmoor Leaf, railed
- Seatpost diameter: 30.9 mm
Frame:
- Frame: Dartmoor Rocbird 29, full suspension, 6061-T6 aluminium
- Frame sizes: Large, XL
- Frame rear axle: 148 x 12 mm Boost
- Frame compatibility: SRAM UDH
Handlebars:
- Bar: Dartmoor Viper Pro, 7075 aluminium, 800 mm width, 35 mm clamp
Stem:
- Stem: Dartmoor Shorty, aluminium, 35 mm clamp
Headset:
- Headset: Dartmoor Blink, IS42/IS52, cartridge bearings
Wheels and rims:
- Rims: Dartmoor Patrol v.2, welded, 29 in front and rear, 32H, tubeless ready
Cranks:
- Cranks: SRAM Eagle 70 Transmission, 170 mm
Chainring or sprocket:
- Chainring: 30T, direct mount
Front hub:
- Front hub: Dartmoor Reel Boost, fully sealed, cartridge bearings, 110 x 15 mm Boost, 32H
Rear hub and driver:
- Rear hub: Dartmoor Reel Boost, fully sealed, cartridge bearings, 148 x 12 mm Boost, 32H, Shimano HG freehub
Chain:
- Chain: SRAM Eagle 70 T-Type
Grips and bar ends:
- Grips: Dartmoor Maze Pro
Pedals:
- Pedals: Dartmoor Vibe
Bottom bracket:
- Bottom bracket: BSA/Euro, 73 mm
Tyres:
- Tyres: Front: Maxxis Assegai, 29 x 2.5 in, WT, folding, EXO; rear: Maxxis Assegai, 29 x 2.5 in, WT, folding, 3C MaxxTerra/EXO+
Warranty registration
Register your purchase to activate the stated two-year manufacturer’s warranty, following the terms supplied with your bike. Keep the purchase receipt and the receipt for the initial professional service.
Replacement parts under a claim
If a claim is accepted and the original product or part is unavailable, the manufacturer or seller may provide an equivalent replacement. Its appearance or construction may differ, while its functional specification remains suitable for the original intended use. This does not affect your statutory consumer rights.
Safety while riding
Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency