Dartmoor Jibbird 27.5-inch slopeduro bike — a simple drivetrain for creative riding:

Key features

• Wheel size: 27.5 in
• Suspension travel: 150 mm front / 140 mm rear
• Fork: RockShox Psylo Gold Isolator RC
• Rear shock: RockShox Deluxe Select, 185 x 55 mm
• Drivetrain: Singlespeed, 32T chainring / 13T driver
• Brakes: Magura MT Thirty hydraulic, four pistons, 180 mm rotor
• Weight: Approx. 13.75 kg

One gear, fewer controls to think about

The Jibbird uses a 32T chainring and 13T rear driver, with a Dartmoor UDH singlespeed tensioner. There is no gear shifter or front derailleur to operate. Choose approaches and routes that suit the fixed ratio; it does not offer a separate low gear for climbing.

Full suspension for jibs and slopeduro

A RockShox Psylo Gold Isolator RC fork and Deluxe Select rear shock give you 150 mm of fork travel and 140 mm of rear frame travel. This combines two 27.5-inch wheels with a suspension layout aimed at dirt, slopeduro and creative riding. Set the suspension for your weight and stay within your ability and the bike’s intended use.

Compare the fit before choosing

The one-size frame is suggested for riders approximately 160–190 cm tall. Check reach, clearance and saddle adjustment in person; the height range alone cannot determine fit. The 800 mm Nitro X-Hi bar and short Beetle stem form the cockpit.

Delivery and returns

Check availability and our shipping costs and delivery times. Read our returns and warranty information before ordering.

Dartmoor Jibbird 27.5-inch slopeduro bike — specifications:

Sizing, weight and other details:

• Wheel size: 27.5 in
• Weight: Approx. 13.75 kg
• Suggested rider height: Approx. 160–190 cm
• Rider level: Intermediate to advanced
• Riding style: Dirt, slopeduro and street

Rear suspension:

• Suspension travel: 150 mm front / 140 mm rear
• Rear shock: RockShox Deluxe Select, 185 x 55 mm

Fork:

• Fork: RockShox Psylo Gold Isolator RC
• Fork axle: 15 mm thru-axle
• Fork steerer: Tapered

Drivetrain:

• Drivetrain: Singlespeed, 32T chainring / 13T driver

Brakes and controls:

• Brakes: Magura MT Thirty hydraulic, four pistons, 180 mm rotor

Frame:

• Frame: 6061-T6 aluminium, full suspension
• Frame size: One size
• Frame rear axle: 148 x 12 mm Boost
• Frame compatibility: SRAM UDH

Handlebars:

• Bar: Dartmoor Nitro X-Hi, 800 mm width, 31.8 mm clamp

Stem:

• Stem: Dartmoor Beetle, Short

Wheels and rims:

• Rims: Dartmoor Shield, 27.5 in

Tyres:

• Tyres: WTB Ranger Comp, 27.5 x 2.3 in

Cranks:

• Cranks: FSA Comet Heavy Duty, 165 mm

Chainring or sprocket:

• Chainring: 32T

Front hub:

• Front hub: 110 x 15 mm Boost

Rear hub and driver:

• Rear hub: 148 x 12 mm Boost, 13T driver

Chain:

• Chain tensioner: Dartmoor UDH
• Chain: Singlespeed chain

Saddle and seatpost:

• Saddle: Dartmoor Player
• Seatpost: 30.9 mm diameter

Grips and bar ends:

• Grips: Dartmoor Maze

Pedals:

• Pedals: Dartmoor Vibe

Warranty registration

Register your purchase to activate the stated two-year manufacturer’s warranty, following the terms supplied with your bike. Keep the purchase receipt and the receipt for the initial professional service.

Replacement parts under a claim

If a claim is accepted and the original product or part is unavailable, the manufacturer or seller may provide an equivalent replacement. Its appearance or construction may differ, while its functional specification remains suitable for the original intended use. This does not affect your statutory consumer rights.

Safety while riding

Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.