
Dartmoor Hornet Trail 27.5-inch mountain bike | Military Green
Description
Dartmoor Hornet Trail 27.5-inch mountain bike — simple gear changes for your time on the trails:
Key features
- Wheel sizes: 27.5 in
- Fork: X-Fusion Mig Air 34 RC, 140 mm travel
- Drivetrain: Shimano Cues U4000 1 x 9
- Brakes: Tektro HD-M280 hydraulic, 180 mm rotors
- Frame sizes: Small, Medium, Large
- Seatpost: Fixed aluminium post
- Weight: 14.80 kg without pedals
Set the air fork to suit you
The X-Fusion Mig Air 34 RC has 140 mm of travel and an air spring you can set for your weight. Follow the fork instructions when setting pressure and damping. The hardtail frame keeps the rear of the bike mechanically simple, without a rear shock to maintain.
Nine gears from one shifter
A 32T chainring and 11–46T cassette give you a choice of ratios for trail climbs and the flatter stretches between them. The Shimano Cues U4000 setup uses one shifter, so you have no front derailleur to manage.
Tektro HD-M280 hydraulic brakes use 180 mm rotors at both wheels. Have the brakes and contact points adjusted, then choose trails within the bike’s intended use and your ability.
The rims are tubeless ready. A conversion also needs compatible tyres, rim tape, valves and sealant; check the whole setup before converting.
Check the fit
The suggested rider height is approximately 160–170 cm for Small, 170–180 cm for Medium and 180–190 cm for Large. Compare reach, standover clearance and saddle adjustment with a bike the rider knows. Check comfortable access to the controls in person.
Frame geometry
| Measurement | Small | Medium | Large |
|---|---|---|---|
| Reach | 410 mm | 435 mm | 465 mm |
| Stack | 625 mm | 625 mm | 625 mm |
| Seat tube length | 380 mm | 410 mm | 440 mm |
| Effective top tube | 596 mm | 620 mm | 650 mm |
| Chainstay length | 425 mm | 425 mm | 425 mm |
| Head tube length | 120 mm | 120 mm | 120 mm |
| Head angle | 64° | 64° | 64° |
| Effective seat angle | 73° | 73° | 73° |
| BB drop | 35 mm | 35 mm | 35 mm |
| Wheelbase | 1158 mm | 1183 mm | 1213 mm |
| Standover | 805 mm | 805 mm | 805 mm |
Dartmoor Hornet Trail 27.5-inch mountain bike — specifications:
Sizing, weight and other details:
- Wheel sizes: 27.5 in
- Weight: 14.80 kg without pedals
- Maximum chainring size: 36T
Fork:
- Fork: X-Fusion Mig Air 34 RC, 140 mm travel
- Fork wheel size: 27.5 in
- Fork axle: 15 mm
- Fork spring and steerer: Air, 1.5 in tapered steerer
- Recommended frame fork travel: 140–180 mm
Drivetrain:
- Drivetrain: Shimano Cues U4000 1 x 9
- Cassette: Shimano Cues LG300, 11–46T
- Rear derailleur: Shimano Cues U4000, 1 x 9
- Shifter: Shimano Cues U4000, 9-speed
Brakes and controls:
- Brakes: Tektro HD-M280 hydraulic, 180 mm rotors
- Maximum rotor diameter: 203 mm
Frame:
- Frame sizes: Small, Medium, Large
- Frame: Dartmoor Hornet, 6061-T6 aluminium
- Frame rear axle: 148 x 12 mm Boost
- Frame headset standard: IS42/IS52
- Frame brake mount: PM 160
Saddle and seatpost:
- Seatpost: Fixed aluminium post
- Saddle: Dartmoor Trail v.2
- Seat clamp diameter: 34.9 mm
- Seatpost: 6061 aluminium, 30.9 mm diameter, 350 mm (Small/Medium) / 400 mm (Large)
Handlebars:
- Bar: Dartmoor Tornado Hi, 780 mm width, 31.8 mm clamp
Stem:
- Stem: Dartmoor Viper, 31.8 mm clamp
Headset:
- Headset: Dartmoor Blink OEM
Wheels and rims:
- Rims: Dartmoor Raptor, 27.5 in, 32H, tubeless ready, F/V
Tyres:
- Tyres: Kenda Nevegal, 27.5 x 2.4 in, 30 TPI, wire bead
- Maximum frame tyre size: 27.5 x 2.8 in
Cranks:
- Cranks: Shimano Cues U6000, 170 mm
Chainring or sprocket:
- Chainring: 32T, 96 mm BCD
Front hub:
- Front hub: Dartmoor Reel Boost, 110 x 15 mm Boost, 32H
Rear hub and driver:
- Rear hub: Dartmoor Reel Boost, 148 x 12 mm Boost, 32H, Shimano HG
Chain:
- Chain: Shimano Cues LG500
Grips and bar ends:
- Grips: Dartmoor Maze Lite
Pedals:
- Pedals: Dartmoor Vibe
Bottom bracket:
- Bottom bracket: BSA/Euro, 73 mm
Safety while riding
Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency