
Dartmoor Bluebird Intro Mullet 29/27.5 trail mountain bike | Graphite / Black Matt
Last item (ready for dispatch)
Description
Dartmoor Bluebird Intro Mullet 29/27.5 trail mountain bike — full suspension for roots and one shifter for the climb:
Key features
- Wheel sizes: 29 in front / 27.5 in rear
- Suspension travel: 130 mm front / 130 mm rear
- Fork: X-Fusion Mig Air 34 RC
- Rear shock: X-Fusion O2 Pro R, 210 x 50 mm
- Drivetrain: Shimano Cues U6000 1 x 10
- Brakes: Shimano MT201 hydraulic, two pistons, 180 mm rotors
- Seatpost: Fixed aluminium post
- Weight: 15.55 kg without pedals
Get used to the trail with one shifter
The Bluebird Intro has one 30T chainring and a ten-speed 11–48T cassette. You can choose a gear for the climb or the next flatter section without operating a front derailleur. The fixed aluminium seatpost keeps saddle-height adjustment straightforward during setup.
Suspension at both wheels
An air-sprung X-Fusion Mig Air 34 RC fork and an X-Fusion O2 Pro R rear shock give the bike 130 mm of travel at each end. They help absorb bumps on forest trails and uneven paths. Set up the suspension for your weight and follow the component instructions.
Two wheel sizes in one bike
The 29-inch front wheel rolls over uneven ground, while the smaller 27.5-inch rear wheel keeps the rear of the bike more compact. This mullet setup uses a matching 29-inch fork and different rim and tyre diameters front and rear.
Set the controls to suit you
The hydraulic disc brakes use two-piston calipers and 180 mm rotors. Check that you can reach the levers comfortably and test the brakes before riding. The tubeless-ready rims allow a compatible tubeless setup with the required tyres, rim tape, valves and sealant.
Choose the frame size
Suggested rider heights are approximately 160–170 cm for Small, 170–180 cm for Medium and 180–190 cm for Large. Compare the geometry with a bike you ride comfortably, and check standover clearance and saddle adjustment in person.
Frame geometry
| Measurement | Small | Medium | Large |
|---|---|---|---|
| Reach | 407 mm | 428 mm | 458 mm |
| Stack | 603 mm | 603 mm | 603 mm |
| Seat tube length | 400 mm | 430 mm | 460 mm |
| Effective top tube | 590 mm | 610 mm | 640 mm |
| Chainstay length | 431 mm | 431 mm | 431 mm |
| Head tube length | 110 mm | 110 mm | 110 mm |
| Head angle | 65.5° | 65.5° | 65.5° |
| Effective seat angle | 74° | 74° | 74° |
| BB drop | 17/31 mm | 17/31 mm | 17/31 mm |
| Wheelbase | 1140 mm | 1160 mm | 1190 mm |
| Standover | 790 mm | 790 mm | 790 mm |
Dartmoor Bluebird Intro Mullet 29/27.5 trail mountain bike — specifications:
Sizing, weight and other details:
- Wheel sizes: 29 in front / 27.5 in rear
- Weight: 15.55 kg without pedals
Rear suspension:
- Suspension travel: 130 mm front / 130 mm rear
- Rear shock: X-Fusion O2 Pro R, 210 x 50 mm
- Rear shock spring: Air
- Shock mounting hardware: 22.2 x 8 mm
Fork:
- Fork: X-Fusion Mig Air 34 RC
- Fork wheel size and axle: 29 in, 15 mm Boost, tapered steerer
- Fork details: Air spring, RC damper, 34 mm aluminium stanchions
Drivetrain:
- Drivetrain: Shimano Cues U6000 1 x 10
- Cassette: Shimano Cues LG400, 11–48T, 10-speed
- Rear derailleur: Shimano Cues U6000, 1 x 10
- Shifter: Shimano Cues U6000, 10-speed
Brakes and controls:
- Brakes: Shimano MT201 hydraulic, two pistons, 180 mm rotors
- Maximum rotor diameter: 180 mm
Saddle and seatpost:
- Seatpost: Fixed aluminium post
- Seat clamp diameter: 34.9 mm
- Saddle: Dartmoor Arrow
- Seatpost: 6061 aluminium, 30.9 mm diameter, 350 mm (Small/Medium) / 400 mm (Large)
Frame:
- Frame: Dartmoor Bluebird Intro Mullet, full suspension, 6061-T6 aluminium
- Frame sizes: Small, Medium, Large
- Frame rear axle: 148 x 12 mm Boost
- Frame headset standard: IS42/IS52
- Frame brake mount: IS
Bottom bracket:
- Bottom bracket: BSA/Euro, 73 mm
Headset:
- Headset: Dartmoor Blink OEM
Handlebars:
- Bar: Dartmoor Tornado Low, 780 mm width, 31.8 mm clamp
Stem:
- Stem: Dartmoor Viper, 31.8 mm clamp
Wheels and rims:
- Rims: Dartmoor Raptor, 29 in front / 27.5 in rear, 32H, F/V, tubeless ready, 30 mm internal width
Tyres:
- Tyres: WTB Trail Boss Comp, 29 x 2.4 in front / 27.5 x 2.4 in rear, wire bead
Cranks:
- Cranks: Shimano Cues U6000, 170 mm (Small/Medium) / 175 mm (Large)
Chainring or sprocket:
- Chainring: 30T, 104 mm BCD
Front hub:
- Front hub: Dartmoor Reel Boost, 110 x 15 mm Boost, 32H
Rear hub and driver:
- Rear hub: Dartmoor Reel Boost, 148 x 12 mm Boost, 32H
Chain:
- Chain: Shimano Cues LG500
Grips and bar ends:
- Grips: Dartmoor Maze Lite
Pedals:
- Pedals: Dartmoor Arrow
Safety while riding
Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency