
Dartmoor Bluebird Intro 29 trail mountain bike | Black Forest Green
Last item (ready for dispatch)
Description
Dartmoor Bluebird Intro 29 trail mountain bike — full suspension for roots and one shifter for the climb:
Key features
- Wheel sizes: 29 in
- Suspension travel: 130 mm front / 130 mm rear
- Fork: X-Fusion Mig Air 34 RC
- Rear shock: X-Fusion O2 Pro R, 210 x 50 mm
- Drivetrain: Shimano Cues U6000 1 x 10
- Brakes: Shimano MT201 hydraulic, two pistons, 180 mm rotors
- Seatpost: Fixed aluminium post
- Weight: Approx. 15.60 kg
Get used to the trail with one shifter
The Bluebird Intro has one 30T chainring and a ten-speed 11–48T cassette. You can choose a gear for the climb or the next flatter section without operating a front derailleur. The fixed aluminium seatpost keeps saddle-height adjustment straightforward during setup.
Suspension at both wheels
An air-sprung X-Fusion Mig Air 34 RC fork and an X-Fusion O2 Pro R rear shock give the bike 130 mm of travel at each end. They help absorb bumps on forest trails and uneven paths. Set up the suspension for your weight and follow the component instructions.
Set the controls to suit you
The hydraulic disc brakes use two-piston calipers and 180 mm rotors. Check that you can reach the levers comfortably and test the brakes before riding. The tubeless-ready rims allow a compatible tubeless setup with the required tyres, rim tape, valves and sealant.
Choose the frame size
Suggested rider heights are approximately 165–180 cm for Medium, 180–190 cm for Large and 190–200 cm for XL. Compare the geometry with a bike you ride comfortably, and check standover clearance and saddle adjustment in person.
Dartmoor Bluebird Intro 29 trail mountain bike — specifications:
Sizing, weight and other details:
- Wheel sizes: 29 in
- Weight: Approx. 15.60 kg
Rear suspension:
- Suspension travel: 130 mm front / 130 mm rear
- Rear shock: X-Fusion O2 Pro R, 210 x 50 mm
- Rear shock spring: Air
Fork:
- Fork: X-Fusion Mig Air 34 RC
- Fork wheel size and axle: 29 in, 15 x 110 mm Boost thru-axle
- Fork details: Air spring, RC damper, 34 mm aluminium stanchions
Drivetrain:
- Drivetrain: Shimano Cues U6000 1 x 10
- Cassette: Shimano Cues LG400, 11–48T, 10-speed
- Rear derailleur: Shimano Cues U6000, 1 x 10
- Shifter: Shimano Cues U6000, 10-speed
Brakes and controls:
- Brakes: Shimano MT201 hydraulic, two pistons, 180 mm rotors
Saddle and seatpost:
- Seatpost: Fixed aluminium post
- Saddle: Dartmoor Arrow, railed
- Seatpost: Aluminium, 30.9 mm diameter, 350 mm (Small/Medium) / 400 mm (Large/XL)
Frame:
- Frame: Dartmoor Bluebird, full suspension, 6061-T6 aluminium
- Frame sizes: Medium, Large, XL
- Frame rear axle: 148 x 12 mm Boost
Headset:
- Headset: Dartmoor Blink, tapered, cartridge bearings
Handlebars:
- Bar: Dartmoor Tornado Low, aluminium, 780 mm width, 31.8 mm clamp
Stem:
- Stem: Dartmoor Viper, aluminium, Short, 31.8 mm clamp
Wheels and rims:
- Rims: Dartmoor Raptor, 29 in, 32H, F/V, tubeless ready, 30 mm internal width
Tyres:
- Tyres: WTB Trail Boss Comp, 29 x 2.4 in
Cranks:
- Cranks: Shimano Cues U6000, 170 mm (Small/Medium) / 175 mm (Large)
Chainring or sprocket:
- Chainring: 30T, 104 mm BCD
Front hub:
- Front hub: Dartmoor Reel Boost, aluminium, cartridge bearings, 110 x 15 mm Boost, 32H
Rear hub and driver:
- Rear hub: Dartmoor Reel Boost, aluminium, cartridge bearings, 148 x 12 mm Boost, 32H
Chain:
- Chain: Shimano Cues LG500
Grips and bar ends:
- Grips: Dartmoor Maze Lite
Pedals:
- Pedals: Dartmoor Vibe
Warranty registration
Register your purchase to activate the stated two-year manufacturer’s warranty, following the terms supplied with your bike. Keep the purchase receipt and the receipt for the initial professional service.
Replacement parts under a claim
If a claim is accepted and the original product or part is unavailable, the manufacturer or seller may provide an equivalent replacement. Its appearance or construction may differ, while its functional specification remains suitable for the original intended use. This does not affect your statutory consumer rights.
Safety while riding
Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry
| Measurement | Medium | Large | XL |
|---|---|---|---|
| Reach | 435 mm | 460 mm | 485 mm |
| Stack | 618 mm | 618 mm | 618 mm |
| Seat tube length | 450 mm | 460 mm | 480 mm |
| Effective top tube | 587 mm | 612 mm | 637 mm |
| Chainstay length | 439 mm | 439 mm | 439 mm |
| Head tube length | 110 mm | 110 mm | 110 mm |
| Head angle | 66° | 66° | 66° |
| Effective seat angle | 76° | 76° | 76° |
| BB drop | 35 mm | 35 mm | 35 mm |
| Wheelbase | 1178 mm | 1203 mm | 1228 mm |
| Standover | 820 mm | 820 mm | 820 mm |

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency