Dartmoor Blackbird Intro 29-inch enduro mountain bike — full suspension to soften bumps and one shifter for the climb:

Key features

• Wheel size: 29 in
• Suspension travel: 160 mm front / 160 mm rear
• Fork: X-Fusion Trace 36 RC
• Rear shock: X-Fusion O2 Pro R, 230 x 65 mm
• Drivetrain: Microshift Advent X 1 x 10, clutch derailleur
• Brakes: Magura MT Thirty hydraulic, four pistons front / two pistons rear, 203 mm front / 180 mm rear rotors
• Seatpost: Fixed aluminium post
• Weight: Approx. 15.65 kg

Suspension for the rougher sections

The X-Fusion Trace 36 RC fork and X-Fusion O2 Pro R rear shock give the Blackbird 160 mm of travel at each end. The full-suspension layout helps absorb bumps from roots, stones and uneven ground on enduro trails. Have the suspension set up according to its instructions and keep to the required service intervals.

Choose a gear for the climb

A 30T chainring works with an 11–48T cassette. The Advent derailleur’s clutch helps manage chain movement over rough ground. You use one shifter, with no front derailleur to operate.

Set your contact points

The fixed aluminium seatpost carries a railed saddle. Set saddle height before riding, then check your reach to the bar and brake levers. Hydraulic disc brakes are included; have their position and operation checked during setup.

Compare the frame sizes

Suggested rider heights are approximately 170–180 cm for Medium, 180–190 cm for Large and 190–200 cm for XL. Use these as a guide, then compare reach and clearance with a bike you know. Choose trails and features within the bike’s intended use and your ability.

Dartmoor Blackbird Intro 29-inch enduro mountain bike — specifications:

Sizing, weight and other details:

• Wheel size: 29 in
• Weight: Approx. 15.65 kg

Rear suspension:

• Suspension travel: 160 mm front / 160 mm rear
• Rear shock: X-Fusion O2 Pro R, 230 x 65 mm

Fork:

• Fork: X-Fusion Trace 36 RC
• Fork wheel size: 29 in
• Fork axle: 15 x 110 mm Boost thru-axle

Drivetrain:

• Drivetrain: Microshift Advent X 1 x 10, clutch derailleur
• Cassette: Microshift CS-H104, 11–48T
• Rear derailleur: Microshift Advent X RD-M6205GM, clutch, 1 x 10
• Shifter: Microshift Advent X SL-M9605-R, 10-speed

Brakes and controls:

• Brakes: Magura MT Thirty hydraulic, four pistons front / two pistons rear, 203 mm front / 180 mm rear rotors

Saddle and seatpost:

• Seatpost: Fixed aluminium post
• Saddle: Dartmoor Leaf, railed
• Seatpost: Aluminium, railed saddle clamp, 30.9 mm diameter, 350 mm (Medium) / 400 mm (Large/XL)

Frame:

• Frame: Dartmoor Blackbird
• Frame construction: Full suspension, 6061-T6 aluminium
• Frame sizes: Medium, Large, XL
• Frame rear axle: 148 x 12 mm Boost

Handlebars:

• Bar: Dartmoor Tornado Low, aluminium, 780 mm width, 31.8 mm clamp

Stem:

• Stem: Dartmoor Viper, aluminium, Short, 31.8 mm clamp

Headset:

• Headset: Dartmoor Blink, cartridge bearings, IS42/IS52

Wheels and rims:

• Rims: Dartmoor Raptor, 29 in, 32H, F/V, tubeless ready, 30 mm internal width

Tyres:

• Tyres: Vee Tire Flow Snap, 29 x 2.35 in, MPC

Cranks:

• Cranks: FSA Gamma Pro, forged aluminium, 170 mm (Medium) / 175 mm (Large/XL)

Chainring or sprocket:

• Chainring: 30T, 82 mm BCD

Front hub:

• Front hub: Dartmoor Reel Boost, fully sealed, cartridge bearings, 110 x 15 mm Boost thru-axle, 32H

Rear hub and driver:

• Rear hub: Dartmoor Reel Boost, fully sealed, cartridge bearings, 148 x 12 mm Boost, 32H, Shimano HG

Chain:

• Chain: KMC X10

Grips and bar ends:

• Grips: Dartmoor Maze Lite

Pedals:

• Pedals: Dartmoor Vibe

Bottom bracket:

• Bottom bracket: BSA/Euro, 73 mm

Warranty registration

Register your purchase to activate the stated two-year manufacturer’s warranty, following the terms supplied with your bike. Keep the purchase receipt and the receipt for the initial professional service.

Replacement parts under a claim

If a claim is accepted and the original product or part is unavailable, the manufacturer or seller may provide an equivalent replacement. Its appearance or construction may differ, while its functional specification remains suitable for the original intended use. This does not affect your statutory consumer rights.

Safety while riding

Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.

Frame geometry