
CTM Skaut 60 Xpert 29-inch enduro mountain bike | Matte Black
Description
CTM Skaut 60 Xpert 29-inch enduro mountain bike — air suspension for your setup and a dropper for descents:
Key features
- Wheel size: 29 in
- Suspension travel: 160 mm front / 160 mm rear
- Fork: RockShox Psylo Silver RC
- Rear shock: RockShox Deluxe Ultimate Linear XL Air
- Drivetrain: SRAM SX Eagle 1 x 12
- Brakes: Shimano MT200 hydraulic / SMRT10M
- Seatpost: EXA Form KSP900 dropper
- Frame sizes: Small, Medium, Large and XL
Set up both ends of the suspension
The Skaut 60 Xpert combines 160 mm of fork travel with 160 mm of rear frame travel. An air-sprung RockShox Psylo Silver RC fork works with a RockShox Deluxe Ultimate Linear XL Air rear shock. Set pressures and damping according to the component instructions and your weight, with help from a workshop that services these suspension systems.
The frame uses a four-link suspension layout. Check its pivots, bearings and shock mountings alongside the fork, brakes and wheel fixings. Follow the service intervals for the fitted components.
Choose a gear for the climb
A 32T chainring and 11–50T cassette give you a choice of ratios for changing gradients. The single-chainring drivetrain uses one shifter, so there is no front derailleur to operate.
More room above the saddle on descents
The EXA Form KSP900 dropper lets you lower the saddle before a descent and raise it again for pedalling. Travel is 125 mm on Small, 150 mm on Medium and 175 mm on Large and XL. Check saddle height and control positions during setup.
Find the frame size that suits you
The suggested rider height is approximately 155–165 cm for Small, 165–175 cm for Medium, 175–185 cm for Large and 185–205 cm for XL. Compare reach, standover clearance and your preferred position with a bike you know. Height alone does not determine fit.
Have the hydraulic brakes adjusted and test them before every ride. Choose trails within the bike’s intended use and your ability, and inspect the bike after hard impacts.
CTM Skaut 60 Xpert 29-inch enduro mountain bike — specifications:
Sizing, weight and other details:
- Wheel size: 29 in
Rear suspension:
- Suspension travel: 160 mm front / 160 mm rear
- Rear shock: RockShox Deluxe Ultimate Linear XL Air
- Rear shock size and spring: 230 x 62.5 mm, air spring, oil damping
Fork:
- Fork: RockShox Psylo Silver RC
- Fork wheel size, spring and axle: 29 in, air spring, oil damping, 15 x 110 mm Boost thru-axle
Drivetrain:
- Drivetrain: SRAM SX Eagle 1 x 12
- Cassette: SRAM CS-PG1210, 11–50T
- Rear derailleur: SRAM SX Eagle
- Shifter: SRAM SX Eagle, 12-speed
Brakes and controls:
- Brakes: Shimano MT200 hydraulic / SMRT10M
Saddle and seatpost:
- Seatpost: EXA Form KSP900 dropper
- Saddle: CTM Cloud M
- Seatpost travel: 125 mm (Small) / 150 mm (Medium) / 175 mm (Large/XL)
Frame:
- Frame sizes: Small, Medium, Large and XL
- Frame: CTM S6 FS 29, 6061 aluminium, four-link suspension, ICR internal cable routing
- Frame rear axle: 12 x 148 mm Boost thru-axle
- Derailleur hanger: SRAM UDH
Handlebars:
- Bar: CTM N06, aluminium, 780 mm width, 25.4 mm (1 in) rise, 35 mm clamp
Stem:
- Stem: CTM 7195, aluminium, 40 mm
Headset:
- Headset: NECO H156, cartridge bearings
Wheels and rims:
- Rims: WTB ST Tough, 29 in, TCS 2.0, 32H, 30 mm width
Tyres:
- Front tyre: Maxxis Minion DHF, 29 x 2.50 in, EXO, tubeless ready
- Rear tyre: Maxxis Dissector, 29 x 2.4 in, EXO, tubeless ready
Cranks:
- Cranks: SRAM FC X1 1000 Eagle, 32T, 170 mm
Bottom bracket:
- Bottom bracket: SRAM BB
Front hub:
- Front hub: Shimano TC500, cartridge bearings, 32H, 15 x 110 mm Boost thru-axle
Rear hub and driver:
- Rear hub: Shimano TC500-B, cartridge bearings, 32H, 12 x 148 mm Boost thru-axle
Chain:
- Chain: SRAM SX Eagle
Pedals:
- Pedals: VPE 527
Safety while riding
Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency