CTM Raptor 2.0 26-inch mountain bike — eight gears for riding between your favourite spots:

Key features

• Suggested rider height: Approx. 160–175 cm
• Frame size: 13 in
• Wheel size: 26 in
• Effective top tube: 585 mm
• Fork: SR Suntour XCR32-COIL LOR, 26 in, 120 mm travel, lockout and rebound adjustment
• Gears: SRAM X4, 8-speed, 11–32T cassette
• Brakes: Shimano MT200 hydraulic discs
• Weight: Approx. 13.4 kg

Eight gears for the ground between spots

The Raptor 2.0 uses a SRAM X4 eight-speed drivetrain with an 11–32T cassette. You can select a gear to suit the gradient instead of riding the same ratio throughout. A Mozartt chain tensioner helps manage the chain, but you still need to check its adjustment and condition.

A 120 mm fork and 26-inch wheels

The SR Suntour XCR32-COIL LOR fork has 120 mm of travel, a lockout and rebound adjustment. You can adjust how quickly the fork extends after compression. WTB SX23 rims carry a Vigilante front tyre and Trail Boss rear tyre. Follow the fork’s setup instructions and open the lockout before riding over rough ground.

The 13-inch frame is made from 6061 aluminium and has a 585 mm effective top tube. The suggested rider height is approximately 160–175 cm. Compare reach, frame clearance and brake-control access before choosing; height alone does not establish fit.

Prepare the bike for your riding

Shimano MT200 hydraulic disc brakes handle braking duties. Have the bike assembled and adjusted before use, and test the brakes before every ride. A 700 mm bar and 50 mm stem complete the cockpit.

Check the manufacturer’s intended-use limits before taking the bike onto jumps or demanding trails. Choose routes and features suited to your ability, and inspect the bike after a hard impact. The listed weight is approximately 13.4 kg.

CTM Raptor 2.0 26-inch mountain bike — specifications:

Sizing, weight and other details:

• Suggested rider height: Approx. 160–175 cm
• Wheel size: 26 in
• Weight: Approx. 13.4 kg

Frame:

• Frame size: 13 in
• Frame: 6061 aluminium

Frame geometry:

• Effective top tube: 585 mm

Fork:

• Fork: SR Suntour XCR32-COIL LOR, 26 in, 120 mm travel, lockout and rebound adjustment

Drivetrain:

• Gears: SRAM X4, 8-speed, 11–32T cassette
• Rear derailleur: SRAM X4, medium cage
• Shifter: SRAM X4 Trigger, 8-speed
• Cassette: SRAM PG 820/8, 11–32T

Brakes and controls:

• Brakes: Shimano MT200 hydraulic discs
• Brake rotor model: Shimano SMRT10S

Handlebars:

• Bar: CTM HB-RB11, aluminium, 700 mm width, 31.8 mm clamp

Stem:

• Stem: CTM LCS, aluminium, 50 mm length, 31.8 mm clamp

Headset:

• Headset: NECO H156

Wheels and rims:

• Rims: WTB SX23, 26 in, 32H

Tyres:

• Front tyre: WTB Vigilante Comp, 26 x 2.3 in
• Rear tyre: WTB Trail Boss Comp, 26 x 2.25 in

Cranks:

• Crankset: Prowheel Suolo 36T / Manobike

Chain:

• Chain tensioner: Mozartt
• Chain: KMC Z7, 106 links

Hubs and guards:

• Hubs: CTM aluminium, Center Lock, quick release, 32H

Bottom bracket:

• Bottom bracket: Prowheel Suolo

Saddle and seatpost:

• Saddle: CTM SL
• Seatpost: CTM SPDC1, 300 mm length, 31.6 mm diameter

Pedals:

• Pedals: VPE-537

Safety while riding

Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.

Frame measurement guide:

This diagram explains the measurement labels. It is an illustration of a hardtail frame, not a drawing or geometry chart for this specific bike.