
WeThePeople Riot 14-inch junior BMX bike, 14-inch TT | Matt Black
Last item (ready for dispatch)
Description
WeThePeople Riot 14-inch junior BMX bike, 14-inch TT — a smaller setup for a younger rider:
Key features
- Suggested rider height: Approx. 110–125 cm
- Top tube length (TT / A): 14 in
- Wheel size: 14 x 2.0 in
- Cranks: Salt Riot, three-piece 4130 chromoly, 114 mm
- Rear hub: Cassette, 10T driver
- Weight: 8.5 kg
The WeThePeople Riot gives a younger rider 14-inch wheels, a 14-inch top tube and 114 mm three-piece chromoly cranks. It offers an in-between size for a child who is not ready for a 16-inch BMX.
Check the fit with your child
The suggested height is approximately 110–125 cm. Have an adult check reach, proportions and whether the rider can control the bike comfortably. The 14-inch TT is the frame’s top tube length; 14 inches is the wheel diameter.
Scaled contact points and speed control
The Salt Riot bars measure 6.5 inches high and 22.4 inches wide, with 110 mm Arrow grips. A Salt Riot lever operates the Salt AM rear U-brake. The rear brake gives the rider a way to manage speed. Practise using it before moving on to more demanding riding.
A 25T sprocket and 10T cassette driver form the gearing. Salt Tracer tyres measure 14 x 2.0 inches, fitted to 20H Salt Beam rims. Have an adult choose an appropriate riding area, supervise use according to ability and check the bike before every ride.
WeThePeople Riot 14-inch junior BMX bike, 14-inch TT — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 110–125 cm
- Wheel size: 14 x 2.0 in
- Weight: 8.5 kg
Frame geometry:
- Top tube length (TT / A): 14 in
- Chainstay length (CS / B): 10.25 in
- Head tube angle (HA / C): 74°
- Seat tube angle (SA / D): 71.5°
- Bottom bracket height (BB / E): 8.25 in
- Standover height (SO / F): 6.5 in
Cranks:
- Cranks: Salt Riot, three-piece 4130 chromoly, 114 mm
Rear hub and driver:
- Rear hub: Cassette, 10T driver
- Rear hub details: Salt Riot, 10 mm chromoly axle, semi-sealed, 20H, 10T driver
Frame:
- Frame: WeThePeople Riot, Hi-Ten 1020
Fork:
- Fork: Salt Riot, 4130 chromoly steerer, Hi-Ten 1020 legs, 26 mm offset
Handlebars:
- Handlebar: Salt Riot, Hi-Ten 1020; height (G): 6.5 in; width (H): 22.4 in
Stem:
- Stem: Salt Junior, aluminium, top load
Headset:
- Headset: Salt Pro, integrated, cartridge bearings
Wheels and rims:
- Rims: Salt Beam, 14 in, 20H
Tyres:
- Tyres: Salt Tracer, 14 x 2.0 in
Bottom bracket:
- Bottom bracket: Spanish, 19 mm, cartridge bearings
Chainring or sprocket:
- Sprocket: Salt Gateway, 25T
Front hub:
- Front hub: Salt Riot, 10 mm chromoly axle, 20H, loose ball bearings
Chain:
- Chain: Salt AM Z1
Brake levers:
- Brake lever: Salt Riot
Brakes and controls:
- Rear brake: Salt AM U-brake
- Gyro fitting: Frame prepared for gyro fitting; gyro not listed as included
Saddle and seatpost:
- Saddle: WeThePeople Riot Junior combo
- Seat clamp: Éclat Pure, forged aluminium
Pedals:
- Pedals: Salt Junior Pro, nylon / fibreglass, 9/16 in
Grips and bar ends:
- Grips: WeThePeople Arrow, 110 mm
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency