WTP WeThePeople Versus 20-inch BMX bike, 20.65-inch TT — compare the geometry and set up your ride:

Key features

• Suggested rider height: Approx. 155–175 cm
• Top tube length (TT / A): 20.65 in
• Wheel size: 20 x 2.25 in
• Bar: 9 in rise (G), 29.25 in width (H)
• Cranks: SaltPlus Ultra, three-piece 4130 chromoly, 170 mm
• Weight: 11.97 kg

The Versus is a complete park BMX with a full chromoly frame, fork and two-piece bar. A SaltPlus Geo gyro and Salt Dual cables let you turn the handlebar without winding up the rear brake cables, while keeping the Eclat Talon rear U-brake fitted.

Room to work on your park setup

The frame has a 20.65-inch top tube, 12.75-inch chainstays and 7.75-inch standover. The suggested rider height is around 155–175 cm. Compare these dimensions with your proportions and preferred position; the 20-inch wheel size alone does not describe the frame fit.

Parts included for your sessions

Two WTP Message pegs and three hub guards are included, so you can check your preferred peg side and set up the bike accordingly. SaltPlus Ultra 170 mm cranks work with a 25T sprocket and 9T cassette driver, and Eclat Mirage 20 x 2.25-inch tyres come fitted.

The Unify Slim Combo saddle combines the saddle and post. Keep the brake, gyro cables, wheels and drivetrain adjusted and checked as you ride.

WTP WeThePeople Versus 20-inch BMX bike, 20.65-inch TT — specifications:

Sizing, weight and other details:

• Suggested rider height: Approx. 155–175 cm
• Wheel size: 20 x 2.25 in
• Weight: 11.97 kg
• Pegs: WTP Message, two included

Frame geometry:

• Top tube length (TT / A): 20.65 in
• Chainstay length (CS / B): 12.75 in
• Head tube angle (HA / C): 75.5°
• Seat tube angle (SA / D): 71°
• Bottom bracket height (BB / E): 11.55 in
• Standover height (SO / F): 7.75 in

Handlebars:

• Bar: 9 in rise (G), 29.25 in width (H)
• Handlebar: SaltPlus Versus, two-piece, full 4130 chromoly; upsweep: 2.5°; backsweep: 11°

Cranks:

• Cranks: SaltPlus Ultra, three-piece 4130 chromoly, 170 mm

Frame:

• Frame: WTP Versus, full 4130 chromoly; tapered stays, removable brake pivots, gyro-ready

Fork:

• Fork: SaltPlus Versus, full 4130 chromoly; 26 mm offset

Stem:

• Stem: WTP Index, aluminium, front load, 50 mm reach

Headset:

• Headset: Salt Pro, integrated, cartridge bearings

Brakes and controls:

• Gyro: SaltPlus Geo, aluminium, sealed; Salt Dual cables
• Rear brake: Eclat Talon U-brake

Wheels and rims:

• Rims: SaltPlus Summit, 20 in, 36H

Tyres:

• Tyres: Eclat Mirage, 20 x 2.25 in

Bottom bracket:

• Bottom bracket: Salt Mid BB, 19 mm, cartridge bearings

Chainring or sprocket:

• Sprocket: WTP Logic, aluminium, 25T

Front hub:

• Front hub: SaltPlus Pro, 10 mm chromoly axle, cartridge bearings, 36H

Rear hub and driver:

• Rear hub: SaltPlus Pro cassette, 14 mm chromoly axle, cartridge bearings, 36H, 9T driver

Hubs and guards:

• Hub guards: SaltPlus Pro, nylon/fibreglass; two front and one rear

Chain:

• Chain: WTP Supply

Brake levers:

• Brake lever: Salt Moto

Saddle and seatpost:

• Saddle: Eclat Unify Slim, Combo
• Seat clamp: Integrated

Pedals:

• Pedals: Eclat Contra, nylon/fibreglass, 9/16 in thread

Grips and bar ends:

• Grips: WTP Manta, 160 mm, with Eclat Tech-Bolt bar ends

Safety while riding

Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.

Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.

Important information about your new bike

• Read the instructions and warranty supplied with the bike before riding.
• The bike is delivered approximately 90% assembled for shipping.
• Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
• Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.

The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.

Frame geometry diagram

Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.