
SIBMX Düvel 20-inch BMX bike, 20-inch TT | Metallic Blue
Description
SIBMX Düvel 20-inch BMX bike, 20-inch TT — find the fit for your freestyle sessions:
Key features
- Suggested rider height: Approx. 145–160 cm
- Top tube length (TT / A): 20 in
- Wheel size: 20 x 2.4 in
- Bar: 9 in rise (G), 28.5 in width (H)
- Cranks: Three-piece 4130 chromoly, 165 mm
- Weight: 11.90 kg
The SIBMX Düvel is a complete BMX for getting started with freestyle. A 20-inch top tube, 9-inch-rise bars and Sunday Current 20 x 2.4-inch tyres give you clear dimensions to compare before choosing your first setup.
A gyro for full handlebar turns
The fitted Odyssey G3 lets the handlebar turn through 360° without winding up the rear brake cables. That is useful when you begin practising barspins while keeping a rear brake fitted. The gyro and cables still need correct adjustment and regular checks.
Three-piece 165 mm chromoly cranks drive a 25T sprocket and 9T cassette driver. A Sunday Freeze stem holds the bars, and the integrated headset uses cartridge bearings.
Choose by fit as well as wheel size
The suggested rider height is around 145–160 cm. Compare the 20-inch top tube, 13.25–13.5-inch chainstay range and bar dimensions with your proportions. Height ranges are a starting point; your preferred position and riding style also matter.
SIBMX Düvel 20-inch BMX bike, 20-inch TT — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 145–160 cm
- Wheel size: 20 x 2.4 in
- Weight: 11.90 kg
- Rider level: Beginner
Frame geometry:
- Top tube length (TT / A): 20 in
- Chainstay length (CS / B): 13.25–13.5 in
- Head tube angle (HA / C): 75°
- Seat tube angle (SA / D): 71°
- Bottom bracket height (BB / E): 11.5 in
- Standover height (SO / F): 8.4 in
Handlebars:
- Bar: 9 in rise (G), 28.5 in width (H)
- Handlebar: 1020 Hi-Ten steel; backsweep: 12°; upsweep: 4°
Cranks:
- Cranks: Three-piece 4130 chromoly, 165 mm
Frame:
- Frame: SIBMX Düvel, 1020 Hi-Ten steel; Low Park geometry
Fork:
- Fork: 1020 Hi-Ten steel
Stem:
- Stem: Sunday Freeze, aluminium, top load
Headset:
- Headset: Integrated, cartridge bearings
Brakes and controls:
- Gyro: Odyssey G3
- Rear brake: Odyssey Springfield U-brake
Wheels and rims:
- Rims: Aluminium, single wall, 20 in, 36H
Tyres:
- Tyres: Sunday Current, 20 x 2.4 in
Bottom bracket:
- Bottom bracket: US BB
Chainring or sprocket:
- Sprocket: 25T
Front hub:
- Front hub: 10 mm chromoly axle, loose ball bearings, 36H
Rear hub and driver:
- Rear hub: Cassette, 14 mm chromoly axle, semi-sealed, 36H, 9T driver
Chain:
- Chain: KMC S1
Brake levers:
- Brake lever: Two-finger
Saddle and seatpost:
- Saddle: One-piece Combo
Pedals:
- Pedals: Wellgo, nylon, 9/16 in thread
Grips and bar ends:
- Grips: Lamellen Grips
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency