
SE Bikes Big Ripper 29-inch wheelie cruiser | Hot Pink
Description
SE Bikes Big Ripper 29-inch wheelie cruiser — single-speed cruising with an adjustable riding position:
Key features
- Suggested rider height: Approx. 165 cm and above
- Wheel size: 29 in
- Frame: 6061 aluminium Floval tubing, Looptail rear end
- Drivetrain: Single speed; 36T chainring and 17T freewheel
- Tyres: SE Bozack, 29 x 2.4 in
- Brake: Tektro 855AL V-brake
- Weight: Approx. 14.51 kg
One gear, room to cruise
If you want a big-wheel ride without changing gears, the Big Ripper keeps things straightforward. A 36T chainring drives a 17T freewheel, so you can pedal when you need to and coast between efforts. The freewheel has nine pawls and 108 engagement points.
Check your position before heading out
The 29-inch wheels and 23.6-inch top tube give you the key measurements to compare with a bike you know. The suggested rider height starts at around 165 cm; check frame clearance and your reach to the bar and brake lever as well. A railed Captive saddle lets you adjust your seated position within the saddle and post limits.
The frame uses 6061 aluminium Floval tubing with the Looptail rear end, paired with a full-chromoly Landing Gear fork. The double-wall aluminium rims have machined sidewalls and metal spoke eyelets, while SE Bozack 29 x 2.4-inch tyres complete the wheels.
Details you will notice on each ride
The build includes ODI Mushroom II Dual Ply grips and X-Pedo platform pedals with removable pins. A Tektro 855AL V-brake and 316A lever provide a cable-operated rim-brake setup. Have it adjusted and test it before each ride.
SE Wheelie pegs, aluminium valve caps and the Checkerboard SE bike pad set are included. The bike pads fit the bike; wear your own suitable helmet and protective pads when riding. Choose a practice area away from traffic and other people.
SE Bikes Big Ripper 29-inch wheelie cruiser — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 165 cm and above
- Wheel size: 29 in
- Weight: Approx. 14.51 kg
- Included accessories: Aluminium valve caps, SE Wheelie pegs and Checkerboard SE bike pad set
Frame:
- Frame: 6061 aluminium Floval tubing, Looptail rear end
Drivetrain:
- Drivetrain: Single speed; 36T chainring and 17T freewheel
- Freewheel: 17T, nine pawls and 108 engagement points
Tyres:
- Tyres: SE Bozack, 29 x 2.4 in
Brakes and controls:
- Brake: Tektro 855AL V-brake
Frame geometry:
- Top tube length (A, actual): 23.6 in / 599 mm
- Seat tube length (B, centre to top): 16.9 in / 429 mm
- Seat tube angle (C): 71°
- Head tube angle (D): 71°
- Chainstay length (E): 18.25 in / 464 mm
- Wheelbase (F): 44 in / 1,118 mm
- Bottom bracket height (G, from the ground): 12.25 in / 311 mm
- Standover height (H, from the ground to the top tube): 30.75 in / 781 mm
Fork:
- Fork: SE Landing Gear, full chromoly, 29 in
Handlebars:
- Bar: SE Big Honkin Cruiser, full chromoly, two-piece; 29 in / 736 mm width, 7 in / 177 mm rise, 12° backsweep, 2° upsweep
Stem:
- Stem: SE Retro, aluminium, top load, 55 mm reach
Headset:
- Headset: Tange, 1-1/8 in, threadless
Wheels and rims:
- Rims: SE, aluminium, 29 in, double wall, 36H; CNC-machined sidewalls and metal spoke eyelets
Front hub:
- Front hub: SE, cartridge bearings, 36H
Rear hub and driver:
- Rear hub: SE Flip Flop Loud, cartridge bearings, 36H
Cranks:
- Cranks: SE V-Ridge, three-piece chromoly, 175 mm
Bottom bracket:
- Bottom bracket: American, 68 mm, cartridge bearings
Chainring or sprocket:
- Chainring: SE Racing, aluminium, 36T
Brake levers:
- Brake lever: Tektro 316A, two-finger
Chain:
- Chain: KMC S1
Saddle and seatpost:
- Saddle: SE Captive, railed, with Custom SE Bottle Opener Brace
- Seatpost: SE, aluminium, for railed saddles
- Seat clamp: SE Racing Champ
Grips and bar ends:
- Grips: Special Edition ODI Mushroom II Dual Ply, made in the USA
Pedals:
- Pedals: X-Pedo Low Profile platforms with removable pins
Safety while riding
Wheelie practice and street riding put loads through the bike. Falls and impacts can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency