
Radio Revo Pro 20-inch BMX bike, 20-inch TT | Black
Last item (ready for dispatch)
Description
Radio Revo Pro 20-inch BMX bike, 20-inch TT — compare the fit for your first street and park sessions:
Key features
- Suggested rider height: Approx. 145–160 cm
- Wheel size: 20 in
- Top tube length (TT / A): 20 in
- Cranks: Three-piece chromoly, 170 mm
- Weight: Approx. 12.5 kg
- Rider level: Beginner
A starting point for street and park
The Revo Pro combines a Hi-Ten frame with three-piece chromoly cranks and a cassette rear hub. It is a complete setup for learning BMX basics, with 170 mm crank arms, 20 x 2.20-inch tyres and a U-brake.
The fork uses a chromoly steerer with Hi-Ten legs. This is a mixed-material fork, so compare the actual construction when looking at different bikes.
Check what the 20-inch measurements mean
Both the top tube and wheels measure 20 inches here, but they describe different parts of the bike. Top tube length is a frame measurement that helps you compare reach; wheel diameter does not tell you how long the frame will feel.
The suggested rider height is around 145–160 cm. Check body proportions and riding position as well as height, using the 8.75-inch bar rise and 29-inch width as further points of comparison.
A cassette drivetrain for learning the basics
The 9T cassette driver engages as you pedal. When the bike rolls backwards, the cranks turn with it, unlike a freecoaster setup. Get familiar with that movement as you practise fakies.
The combo saddle and post form one unit, without separate saddle-angle adjustment. Set the saddle height within the post’s permitted limits and check the clamp is secure.
Prepare it before the first session
Have the brake adjusted so you can reach and operate the lever comfortably. Check the wheels, axle fixings, pedals, cranks and bar before riding. After a hard impact, inspect the bike again and have any loose or damaged parts checked before returning to your session.
Radio Revo Pro 20-inch BMX bike, 20-inch TT — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 145–160 cm
- Wheel size: 20 in
- Weight: Approx. 12.5 kg
- Rider level: Beginner
- Intended use: Street and park BMX
Frame geometry:
- Top tube length (TT / A): 20 in
Cranks:
- Cranks: Three-piece chromoly, 170 mm
Frame:
- Frame material: Hi-Ten steel
Fork:
- Fork: Chromoly steerer, Hi-Ten legs
Handlebars:
- Handlebar: 8.75 in rise (G), 29 in width (H)
Stem:
- Stem: Aluminium, top load
Wheels and rims:
- Wheels: 20 in, 36H
Tyres:
- Tyres: 20 x 2.20 in
Bottom bracket:
- Bottom bracket: USA BB
Chain:
- Chain: KMC S1
Front hub:
- Front hub axle: 10 mm
Rear hub and driver:
- Rear hub: Cassette, 9T driver, 14 mm axle
Brakes and controls:
- Brake: U-brake
Brake levers:
- Brake lever: Aluminium
Saddle and seatpost:
- Saddle and post: Combo
- Seat clamp: Aluminium
Grips and bar ends:
- Grips: Flangeless, 150 mm
Pedals:
- Pedals: Nylon
Safety while riding
Freestyle BMX riding puts high loads through the bike during tricks, jumps and landings. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and riding a BMX bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame geometry diagram
Use the letters in the specification to identify each measurement. TT is top tube length, CS is chainstay length, HA is head tube angle, SA is seat tube angle, BB is bottom bracket height and SO is standover height. On the handlebar drawing, G marks height and H marks width.

Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency