
Radio Fiend 26-inch MTB bike | Candy Blue
Description
Radio Fiend 26-inch MTB bike — eight gears for the ride to your next session:
Key features
- Suggested rider height: Approx. 160 cm and above for size M; guide only
- Wheel size: 26 in
- Level: Intermediate to advanced
- Frame: 6061-T6 aluminium, tapered head tube
- Fork: RST Omega T26, 100 mm travel
- Drivetrain: 1 x 8; 32T narrow-wide chainring and 12–32T cassette
- Brakes: Tektro Aries mechanical discs, 160 mm rotors front and rear
- Weight: Approx. 13.74 kg
Gears for more than the session itself
The Fiend pairs a 32T chainring with an eight-speed 12–32T cassette. You can select a lower gear for a climb or change your pedalling pace as the route changes. The Sun Race shifter and rear derailleur operate the eight gears, with no front shifter to manage.
The narrow-wide chainring helps retain the chain, but correct setup and chain condition still matter. Check the drivetrain before riding.
A 26-inch build with room to adjust your position
The 6061-T6 aluminium frame has a tapered head tube and is paired with a 100 mm RST Omega T26 fork. The suggested rider height starts at around 160 cm for size M; check the selected frame size, reach and clearance rather than relying on that height alone.
A railed Radio DJ saddle and 300 mm Micro-Adjust post let you adjust your seated position within their limits. Radio Pro two-piece forged-aluminium cranks have 170 mm arms and a 24 mm spindle.
Mechanical discs and double-wall rims
Tektro Aries mechanical disc brakes use 160 mm rotors at the front and rear, operated by RS-360A levers. Have them adjusted and test their operation before riding. These are cable-operated brakes.
Double-wall Radio DB30 rims carry Radio Rookie 26 x 2.2-inch tyres. Sealed Radio AM-DJ hubs, nylon/fibreglass Slim pedals and flangeless Frequency XL grips complete the build. Its listed weight is approximately 13.74 kg.
Radio Fiend 26-inch MTB bike — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 160 cm and above for size M; guide only
- Wheel size: 26 in
- Level: Intermediate to advanced
- Weight: Approx. 13.74 kg
Frame:
- Frame: 6061-T6 aluminium, tapered head tube
- Frame model: Radio Fiend
Fork:
- Fork: RST Omega T26, 100 mm travel
Drivetrain:
- Drivetrain: 1 x 8; 32T narrow-wide chainring and 12–32T cassette
- Cassette: Sun Race, 8-speed, 12–32T
- Shifter: Sun Race, 8-speed
- Rear derailleur: Sun Race, 8-speed
Brakes and controls:
- Brakes: Tektro Aries mechanical discs, 160 mm rotors front and rear
Handlebars:
- Bar: Radio Asura, 6061-T6 aluminium, 31.8 mm clamp
Stem:
- Stem: Radio DJ, front load, 40 mm reach
Headset:
- Headset: FSA No.57E, integrated A-headset, 1-1/8–1.5 in
Chain:
- Chain: KMC X8
Cranks:
- Cranks: Radio Pro, two-piece forged aluminium, 170 mm, 24 mm spindle
Bottom bracket:
- Bottom bracket: Radio BSA24, sealed bearings
Chainring or sprocket:
- Sprocket: Radio AM, steel, 32T, narrow-wide
Brake levers:
- Brake levers: Tektro RS-360A, front and rear
Wheels and rims:
- Rims: Radio DB30, 26 in, double wall
Front hub:
- Front hub: Radio AM-DJ, sealed, 3/8 in male axle, 32H
Rear hub and driver:
- Rear hub: Radio AM-DJ disc cassette, sealed, 3/8 in male axle, 32H
Tyres:
- Tyres: Radio Rookie, 26 x 2.2 in
Pedals:
- Pedals: Radio Slim, nylon/fibreglass
Grips and bar ends:
- Grips: Radio Frequency XL, flangeless, 160 mm
Saddle and seatpost:
- Saddle: Radio DJ, railed
- Seatpost: Radio SP53, Micro-Adjust, aluminium, 300 mm
- Seat clamp: Radio Quick Release, aluminium
Safety while riding
Dirt jumps, tricks and landings put high loads through the bike. Falls and impacts can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency