
RMD Bike Co. BMX Pegs | Pair | Black
Description
RMD Bike Co. BMX pegs, pair — choose your length and replace the sleeves as they wear:
Key features
- Set contents: 2 pegs with 2 polyamide sleeves; 10 mm and 12 mm axle adapters
- Core material: 7075/PA9 aluminium
- Length options: 100 mm or 110 mm
- Outer diameter: 39 mm
- 100 mm version: 120 g per peg, including sleeve
- 110 mm version: 125 g per peg, including sleeve
RMD Bike Co. BMX pegs combine an aluminium core with a replaceable polyamide sleeve. The sleeve provides the sliding surface for ledges and rails and helps protect the core from direct contact with the obstacle.
Replace the sleeve as it wears
The abrasion-resistant polyamide sleeve has a 9 mm wall. You can replace a worn sleeve instead of replacing the whole peg, provided the core is still in serviceable condition.
Choose your length
The 100 mm version weighs 120 g per peg with its sleeve. Choose it for a more compact setup. The 110 mm version gives you more length to land on a ledge or rail and weighs 125 g per peg with its sleeve. Both have a 39 mm outer diameter.
Two pegs and axle adapters included
The price is for a pair. You can run one at the front and one at the rear on the same side, or choose another arrangement that your hubs and axles accommodate. Each peg has a 14 mm bore, with adapters supplied for 10 mm and 12 mm axles.
Check axle diameter, available axle length and secure fastening before fitting. The set is made in Poland, with 7075/PA9 aluminium cores.
Compare other BMX pegs when planning your setup.
Protection for your next session
Wear a suitable helmet and protective pads when practising tricks.
Frequently asked questions
Is the price for one peg?
No. The set contains two RMD Bike Co. pegs with sleeves.
Which axles do they fit?
The bore is 14 mm. Adapters for 10 mm and 12 mm axles are included. Check axle length and secure fastening too.
Which length should I choose?
The 100 mm option is more compact. The 110 mm option gives you more length when landing on a ledge or rail.
What does the polyamide sleeve do?
It provides the sliding surface and helps protect the aluminium core. The sleeve can be replaced when worn.
Can I use them at a skatepark?
Some skateparks require plastic-sleeved pegs to limit damage to obstacles. Check the rules at the park you visit.
Can I fit one at the front and one at the rear?
Yes, if both hubs and axles allow the pegs to be fitted securely. Check each axle before installation.
RMD Bike Co. BMX pegs, pair — specifications:
- Set contents: 2 pegs with 2 polyamide sleeves; 10 mm and 12 mm axle adapters
- Core material: 7075/PA9 aluminium
- Sleeve: abrasion-resistant polyamide; 9 mm wall thickness
- Length options: 100 mm or 110 mm
- Outer diameter: 39 mm
- Axle bore: 14 mm; adapters for 10 mm and 12 mm axles included
- 100 mm version: 120 g per peg, including sleeve
- 110 mm version: 125 g per peg, including sleeve
- Made in: Poland
Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency