The NS Bikes Soda V2 Freeride MTB Bike delivers outstanding control, 180 mm of suspension travel and agile handling for bike parks, Slopestyle lines and Freeride trails.

NS Bikes Soda V2 – key features

• Recommended rider height: S: approx. 160–170 cm / M: approx. 170–180 cm / L: approx. 180–190 cm
• Wheel size: 27.5"
• Frame: Hydroformed 6061-T6 aluminium
• Suspension travel: 180 mm front / 180 mm rear
• Drivetrain: Shimano Deore 1x12
• Brakes: Shimano MT410 4-piston hydraulic disc
• Dropper post: Kind Shock Rage
• Level: Intermediate / Advanced

Built to fly, not just ride

The NS Bikes Soda V2 is designed for riders who want maximum airtime and total confidence on every jump. Its compact geometry, 27.5" wheels and 180 mm suspension create a bike that responds instantly to rider input and stays composed during take-offs and landings.

Whether you're riding bike parks, Slopestyle courses, Freeride trails or urban spots, the Soda V2 is built to make every session more playful. It combines stability, agility and confidence, making it equally capable on big jumps and technical features.

180 mm suspension built for hard landings

The RockShox Domain R fork with DebonAir air spring works together with the RockShox Vivid Trunnion rear shock to deliver 180 mm of travel at both ends. The suspension absorbs large impacts while keeping the bike stable and predictable through rough terrain and heavy landings.

A Shimano Deore 1x12 drivetrain offers a wide gear range for climbing and descending, while powerful Shimano MT410 four-piston brakes provide consistent stopping performance when speed and control matter most.

Choosing the right frame size

The NS Bikes Soda V2 is available in three frame sizes, allowing you to match the bike to both your height and riding style.

View the complete frame geometry here.

Ride protected

Whether you're riding bike parks, Freeride trails or Slopestyle jumps, proper protection is essential. Pair your bike with a quality helmet and durable protective gear to reduce the risk of injury and ride with greater confidence.

NS Bikes Soda V2 – technical specification

• Frame: NS Bikes Soda V2, hydroformed 6061-T6 aluminium, triple-butted tubes, double-pass welds, 180 mm rear travel, Boost 148 × 12 mm
• Fork: RockShox Domain R, 27.5", 180 mm travel, DebonAir air spring, Boost 15 × 110 mm axle
• Rear shock: RockShox Vivid Trunnion Air, 225 × 75 mm
• Handlebar: NS Bikes 35, aluminium, 800 mm wide, 20 mm rise, 35 mm clamp
• Stem: NS Bikes Tone, aluminium, 35 mm
• Headset: Integrated IS42/IS52 tapered, sealed bearings
• Rims: Octane One Solar 27.5", 32H, Tubeless Ready
• Tyres: Schwalbe Big Betty BikePark 27.5" × 2.4"
• Crankset: Shimano Deore FC-MT5101, 170 mm, 32T
• Bottom bracket: Shimano BSA 73 mm
• Front hub: NS Bikes Boost, aluminium, 110 × 15 mm, sealed bearings, 32H
• Rear hub: NS Bikes Boost, aluminium, 148 × 12 mm, sealed bearings, 32H
• Cassette: SunRace CSMZ800, 11–51T, 12-speed
• Rear derailleur: Shimano Deore M6100
• Shifter: Shimano Deore M6100, 12-speed
• Chain: Shimano Deore M6100, 12-speed
• Brakes: Shimano MT410 hydraulic 4-piston, 200 mm front / 180 mm rear rotors
• Saddle: NS Dirt Slim Railed
• Seatpost: Kind Shock Rage I dropper, S: 125 mm / M: 150 mm / L: 170 mm, Ø31.6 mm
• Grips: NS Bikes Hold Fast
• Pedals: Not included

Freeride and Slopestyle bikes are built to handle heavy impacts from jumps, drops and technical riding, but no performance bike is indestructible. Regularly inspect the frame, suspension, wheels, drivetrain and all bolts to keep your bike safe and performing at its best.

Important information before your first ride

• Read the warranty documentation before using your bike.
• Your bike is delivered approximately 90% assembled.
• Before riding, install the pedals, handlebar and, if required, the front wheel.
• NS Bikes recommends having the bike inspected and adjusted by a professional bicycle workshop before first use.
• Keep your service receipt, as it may be required for future warranty claims.

Manufacturer and seller notice:

If a warranty or claim is accepted, the manufacturer or seller may replace unavailable original components with technically equivalent alternatives. Replacement parts may differ in appearance but will provide the same intended function and performance.