
Dartmoor Hornet 26-inch mountain bike | Black
Last item (ready for dispatch)
Description
Dartmoor Hornet 26-inch mountain bike — a choice of gears for street and trail sessions:
Key features
- Suggested rider height: Approx. 160–175 cm
- Wheel size: 26 in
- Frame size: One size, 603 mm effective top tube
- Fork: X-Fusion Slant RC, 130 mm travel, 15 mm thru-axle
- Drivetrain: Microshift Advent 1 x 9, clutch derailleur, 11–42T cassette
- Brakes: SRAM Level hydraulic, two pistons
- Rotors: 180 mm front / 160 mm rear
- Weight: Approx. 13.95 kg
Change gear when the ground changes
The Hornet 26 combines a 30T chainring with an 11–42T cassette. Nine rear gears let you choose a ratio for the climb or the ride between spots, with one shifter to operate. The Advent rear derailleur has a clutch to help manage chain movement over rough ground.
A 130 mm fork with front and rear brakes
The X-Fusion Slant RC fork provides 130 mm of travel. SRAM Level two-piston hydraulic brakes use a 180 mm front rotor and 160 mm rear rotor. Set up the fork according to its instructions and test both brakes before every ride.
Shield double-wall rims carry Vee Tire Flow Snap 26 x 2.4-inch tyres. A 780 mm Tornado Hi bar and short Viper stem form the cockpit, with Maze Lite grips and Vibe pedals at the contact points.
Check the fit before your first session
The one-size frame has a 603 mm effective top tube, with a suggested rider height of approximately 160–175 cm. Compare reach, frame clearance and brake-control access with a bike you know. Height alone does not decide fit.
The Hornet 26 is intended for street, pumptracks and trail riding, including dirt and 4X use within the manufacturer’s limits. Match features to your ability and inspect the bike after hard impacts. Its listed weight is approximately 13.95 kg.
Dartmoor Hornet 26-inch mountain bike — specifications:
Sizing, weight and other details:
- Suggested rider height: Approx. 160–175 cm
- Wheel size: 26 in
- Weight: Approx. 13.95 kg
Frame:
- Frame size: One size, 603 mm effective top tube
- Frame: Dartmoor Hornet 26, hydroformed 6061-T6 aluminium
Fork:
- Fork: X-Fusion Slant RC, 130 mm travel, 15 mm thru-axle
Drivetrain:
- Drivetrain: Microshift Advent 1 x 9, clutch derailleur, 11–42T cassette
- Cassette: Microshift Advent H093, 11–42T
- Rear derailleur: Microshift Advent M6195M, clutch, 1 x 9
- Shifter: Microshift Advent Trail Pro M9295-R, 9-speed
Brakes and controls:
- Brakes: SRAM Level hydraulic, two pistons
- Rotors: 180 mm front / 160 mm rear
Handlebars:
- Bar: Dartmoor Tornado Hi, aluminium, 780 mm width, 31.8 mm clamp
Stem:
- Stem: Dartmoor Viper, aluminium, Short, 31.8 mm clamp
Headset:
- Headset: Dartmoor Blink, cartridge bearings
Wheels and rims:
- Rims: Dartmoor Shield, 26 in, 32H, double wall
Tyres:
- Tyres: Vee Tire Flow Snap, 26 x 2.4 in
Cranks:
- Cranks: FSA Gamma Pro, 170 mm
Chainring or sprocket:
- Chainring: 30T, 82 mm BCD
Front hub:
- Front hub: Dartmoor Reel, aluminium, cartridge bearings, 100 x 15 mm thru-axle, 32H
Rear hub and driver:
- Rear hub: Dartmoor Reel Boost, aluminium, cartridge bearings, 148 x 12 mm axle, 32H
Chain:
- Chain: KMC Z9
Saddle and seatpost:
- Saddle: Dartmoor Leaf, railed
- Seatpost: Aluminium, 30.9 x 350 mm
Grips and bar ends:
- Grips: Dartmoor Maze Lite
Pedals:
- Pedals: Dartmoor Vibe
Warranty registration
Register your purchase to activate the stated two-year manufacturer’s warranty, following the terms supplied with your bike. Keep the purchase receipt and the receipt for the initial professional service.
Replacement parts under a claim
If a claim is accepted and the original product or part is unavailable, the manufacturer or seller may provide an equivalent replacement. Its appearance or construction may differ, while its functional specification remains suitable for the original intended use. This does not affect your statutory consumer rights.
Safety while riding
Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency