Dartmoor Candy low-profile platform pedals give you solid support and a more direct feel for the bike

Dartmoor Candy pedals key features:

• Platform: nylon
• Axle: Cr-Mo steel
• Bearings: LB ball bearings
• Thread: 9/16"
• Platform size: 111 x 105 x 25 mm
• Pins: 10 per side
• Weight: 330 g per pair

The low profile gives you a more direct feel

The Dartmoor Candy platform is 25 mm thick. That keeps your foot closer to the pedal axle, so the bike feels more direct when you pump through a transition, load up before a jump or settle into a landing.

When you push hard through a corner or set your feet before take-off, the pedal does not feel tall or disconnected from the crank. You get a lower, more planted position that helps you react faster to what the bike is doing underneath you.

The wide platform gives your foot stable support

The 111 x 105 mm platform gives your shoe plenty of room. You do not have to land perfectly in the centre every time, which is useful after a jump, a manual or a quick foot adjustment.

The larger contact area also spreads pressure more evenly across your foot. That makes it easier to hold a stable position on rough ground, through the skatepark or around a pump track.

Ten pins per side help keep your shoes planted

Each side of the pedal has 10 pins. They increase the contact between the sole of your shoe and the platform, helping reduce unwanted foot movement when you push hard, land or ride over uneven ground.

If you like to move the bike actively underneath you, the extra grip helps you stay in control without constantly having to reset your feet.

The nylon platform keeps unnecessary weight down

The platform is made from nylon, bringing the total weight to 330 g per pair. You get a broad and supportive pedal without adding the extra weight of a heavy metal platform.

It is a practical setup if you want a simple, functional pedal with plenty of support and a lighter feel under the bike.

The Cr-Mo axle gives you a stiff connection to the crank

The axle is made from Cr-Mo steel. It keeps the pedal feeling solid under pressure when you accelerate, load up for take-off or drive hard through the pedals.

The 9/16" thread is designed for cranks using the same fitting. Check the thread standard on your crank before ordering to make sure the pedals are compatible.

You can find more bike pedals for BMX, MTB and freestyle riding in our pedal category.

Detailed technical specification:

Pedals:

• Model: Dartmoor Candy
• Type: platform pedals
• Platform material: nylon
• Axle material: Cr-Mo steel
• Bearings: LB ball bearings
• Thread: 9/16"
• Platform size: 111 x 105 x 25 mm
• Pins: 10 per side
• Weight: 330 g per pair

FAQ – frequently asked questions about Dartmoor Candy pedals

Before every ride, check that the pedals are correctly tightened and do not have excessive play. The left and right pedals use opposite thread directions, so always fit them according to the markings on the axle.