
CTM Zephyr Comp Junior 26-inch trail mountain bike | Matt Ground Green
Last item (ready for dispatch)
Description
CTM Zephyr Comp Junior 26-inch trail mountain bike — one shifter for trail rides and changing gradients:
Key features
- Wheel size: 26 in
- Frame: 6061-T6 aluminium, 148 x 12 mm Boost rear axle, SRAM UDH hanger
- Fork: Suntour XCM34 Boost, 130 mm travel
- Drivetrain: Shimano 1 x 9, 11–46T cassette
- Brakes: Shimano MT200 hydraulic / SMRT10
- Frame sizes: Small and Medium
- Weight: Approx. 14 kg
A choice of gears for changing gradients
The Zephyr Comp Junior has a 32T chainring and 11–46T cassette. You can choose a gear for the gradient with one shifter, without operating a front derailleur. Keep the drivetrain adjusted and lubricated according to its instructions.
A 130 mm suspension fork
The Suntour XCM34 Boost fork provides 130 mm of travel. Follow its setup and servicing instructions. Check the wheel fixings and test both brakes before every ride.
Check your riding position
The suggested rider height is approximately 155–165 cm for Small and 165–175 cm for Medium. An adult should check standover clearance, reach and access to the brake controls. Height is a starting point rather than a guarantee of fit.
Choose routes within the bike’s intended use and your ability. Have it assembled and adjusted before the first ride, check it regularly and stop riding if you find damage or play. Its listed weight is approximately 14 kg.
Frame geometry
| Measurement | Small | Medium |
|---|---|---|
| Head angle | 67° | 67° |
| Seat angle | 82.3° | 82.3° |
| Horizontal top tube | 540 mm | 560 mm |
| Seat tube length | 340 mm | 390 mm |
| Chainstay length | 425 mm | 425 mm |
| Front centre | 658.5 mm | 679 mm |
| Head tube length | 100 mm | 100 mm |
| BB drop | -25 mm | -25 mm |
| Fork length | 525 mm | 525 mm |
| Fork offset | 46 mm | 46 mm |
| Wheelbase | 1082.5 mm | 1102.5 mm |
| Reach | 370.5 mm | 390.5 mm |
| Stack | 585 mm | 585 mm |
CTM Zephyr Comp Junior 26-inch trail mountain bike — specifications:
Sizing, weight and other details:
- Wheel size: 26 in
- Weight: Approx. 14 kg
Frame:
- Frame: 6061-T6 aluminium, 148 x 12 mm Boost rear axle, SRAM UDH hanger
- Frame sizes: Small and Medium
- Frame model: CTM Zephyr 26
- Frame fittings: ISCG05 chain-guide mount, internal cable routing
Fork:
- Fork: Suntour XCM34 Boost, 130 mm travel
- Fork wheel size: 27.5 in
- Fork axle: 15 x 110 mm Boost thru-axle
Drivetrain:
- Drivetrain: Shimano 1 x 9, 11–46T cassette
- Cassette: Shimano Cues CS-LG300, 9-speed, 11–46T
- Rear derailleur: Shimano Cues RD-U4000
- Shifter: Shimano Cues SL-U4000, 9-speed
Brakes and controls:
- Brakes: Shimano MT200 hydraulic / SMRT10
Handlebars:
- Bar: CTM N04, aluminium, 740 mm width, 31.8 mm clamp
Stem:
- Stem: CTM 7140, aluminium
Headset:
- Headset: NECO H156, cartridge bearings
Wheels and rims:
- Rims: WTB SX25, 26 in, 32H
Tyres:
- Front tyre: WTB Trail Boss, 26 x 2.25 in
- Rear tyre: WTB Trail Boss, 26 x 2.25 in
Cranks:
- Cranks: Shimano FC-UT400, 32T, 165 mm
Front hub:
- Front hub: Shimano TC500, 15 x 110 mm Boost axle, cartridge bearings, 32H
Rear hub and driver:
- Rear hub: Shimano TC500-B, 12 x 148 mm Boost axle, cartridge bearings, 32H
Chain:
- Chain: KMC XGLIDE
Saddle and seatpost:
- Saddle: CTM Cloud M
- Seatpost specification: CTM LCSP, 31.6 mm diameter, 350 mm length
Pedals:
- Pedals: VPE 537
Bottom bracket:
- Bottom bracket: Shimano BB
Safety while riding
Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame measurement guide:
This diagram explains the measurement labels. It is an illustration of a hardtail frame, not a drawing or geometry chart for this specific bike.
Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency
