
CTM Raptor 26-inch mountain bike | Anthracite
Description
CTM Raptor 26-inch mountain bike — one shifter for trails and pumptrack sessions:
Key features
- Wheel size: 26 in
- Fork: RST Dirt, 130 mm travel
- Drivetrain: Shimano 1 x 8
- Brakes: Shimano MT200 hydraulic, SM-RT10 rotors
- Suggested rider height: Approx. 160–175 cm
- Weight: Approx. 14 kg
Gears for the ride between the turns
The Raptor pairs a 36T chainring with an 11–32T eight-speed cassette. You can change gear for the approach or the next section of trail using one shifter, without a front derailleur to manage. A Mozartt chain tensioner is included in the listed build.
A suspension fork for uneven ground
The RST Dirt fork has 130 mm of travel. It works with 26 x 2.25-inch WTB Trail Boss tyres on WTB SX25 rims. This is a hardtail for riders interested in trails and pumptrack riding; choose features and jumps within the bike’s intended use and your ability.
Shimano MT200 hydraulic disc brakes give you separate front and rear braking controls. Have their position and operation checked before riding. The 740 mm bar is fitted to a CTM 7140 stem, with a CTM Cloud M saddle on a 31.6 mm post.
Check clearance and reach
The suggested rider height is approximately 160–175 cm. Check your position, standover clearance and access to the controls in person. The listed weight is approximately 14 kg.
Frame geometry
| Measurement | Frame |
|---|---|
| Head angle | 69° |
| Seat angle | 74° |
| Horizontal top tube | 585 mm |
| Seat tube length | 340 mm |
| Chainstay length | 400 mm |
| Front centre | 676 mm |
| Head tube length | 115 mm |
| BB drop | −20 mm |
| Fork length | 485 mm |
| Fork offset | 40 mm |
| Wheelbase | 1075 mm |
CTM Raptor 26-inch mountain bike — specifications:
Sizing, weight and other details:
- Wheel size: 26 in
- Suggested rider height: Approx. 160–175 cm
- Weight: Approx. 14 kg
Fork:
- Fork: RST Dirt, 130 mm travel
Drivetrain:
- Drivetrain: Shimano 1 x 8
- Cassette: Shimano CS-HG41/8, 11–32T
- Rear derailleur: Shimano Altus RD-M310
- Shifter: Shimano SL-M315, 8-speed
Brakes and controls:
- Brakes: Shimano MT200 hydraulic, SM-RT10 rotors
Frame:
- Frame: CTM Raptor, 6061-T6 aluminium
Handlebars:
- Bar: CTM N04, aluminium, 740 mm width, 31.8 mm clamp
Stem:
- Stem: CTM 7140, aluminium
Headset:
- Headset: NECO H156, cartridge bearings
Wheels and rims:
- Rims: WTB SX25, 26 in, 32H
Tyres:
- Tyres: WTB Trail Boss, 26 x 2.25 in
Cranks:
- Chainset: Prowheel Suolo, 36T
Chain:
- Chain tensioner: Mozartt
- Chain: KMC Z7
Front hub:
- Front hub: CTM, Center Lock, cartridge bearings, 32H
Rear hub and driver:
- Rear hub: CTM cassette hub, cartridge bearings, 32H, Shimano HG
Saddle and seatpost:
- Saddle: CTM Cloud M
- Seatpost: CTM LCSP, 350 mm length, 31.6 mm diameter
Pedals:
- Pedals: VPE 537
Safety while riding
Riding, falls and impacts put loads through the bike and can damage components. No bike is indestructible: parts can wear out or become damaged. Check the frame, fork, bars, wheels, axles, cranks, pedals, brakes and bolted connections before every ride. Inspect the bike after a hard impact and stop riding if you find looseness, cracks or damage. Have any problem checked and repaired before riding again.
Wear a properly fitted helmet and suitable protective pads. Read our important information before buying and using a bike for assembly, servicing and riding checks.
Important information about your new bike
- Read the instructions and warranty supplied with the bike before riding.
- The bike is delivered approximately 90% assembled for shipping.
- Before the first ride, fit the pedals, saddle and handlebars, and the front wheel where required. Follow the assembly instructions and check all components.
- Have a professional bike workshop carry out a pre-ride inspection. This is a paid service; keep the receipt as proof for the manufacturer’s warranty and follow the warranty terms supplied with your bike.
The manufacturer’s warranty is separate from your statutory consumer rights. Continue to inspect and service the bike throughout its use.
Frame measurement guide:
This diagram explains the measurement labels. It is an illustration of a hardtail frame, not a drawing or geometry chart for this specific bike.
Safety
Shipping costs
The price does not include any possible payment costs
Log in
Language
Please choose the right language
Currency
